Jigsaw Blades

The DeWalt DT2975-QZ TCT Alligator Saw Blade is primarily used for cutting Gasbeton and Building Block and is suitable for use with the DWE397/398 and 399 Alligator Saw. Specifications • Length: 430mm • Tip Material: TCT • Primary Application: Gasbeton and Building Block • Fits: DWE397/398/399Features & Benefits• Optimised for cutting Building block and Gasbeton • TCT Teeth to improve the performance of the DeWalt Alligator Saw.

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Integral bark cutterSpecifications:Surface Finishing: Chemical NickeledMaterial: Strip SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: 4.5mmTooth …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Seperate bark cutterSpecifications:Surface Finishing: Hard-Chrome PlatingMaterial: High-Carbon SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: …

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

The Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics. It cuts precisely right from the start thanks to a rounded cutting edge called Curved-Tec. The blade's Starlock sturdy mounting system increases control for highly accurate cutting that transmits power directly and reduces wobbling. This versatile blade also cuts through very hard combined wooden and metal materials including non-hardened nails and screws, non-ferrous pipes and profiles with smaller dimensions. When cutting non-hardened metals and abrasive materials, the BIM (bi-metal) combination of an HCS (high carbon steel) blade and HSS (high-speed steel) teeth resists wear and heat, ensuring …

Lasts up to 50x longer than a Bi-Metal bladeWhen hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The Expert MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.The Expert MetalMax is at the very cutting edge of Bosch Carbide Technology. Not only are its teeth made from a strip of extremely hard metal that can cut even stainless steel, it also boasts a high-tech extra coating for maximum longevity. The flat edge is optimised for cut-offs as it is less prone to skidding on screws or pipes.You’ve seen th…

The Vitrex 10 3412 Ultimate Diamond Blade is suitable for use in a tile cutter and has both high strength and durability. It has a continuous rim which produces extra clean cuts on ceramic, porcelain, granite, marble and natural stone. In addition, it helps to prevent chipping and cracking of tiles, which can be a common problem. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 200mm.Additional Information:• Diameter: 200mm