Car Jacks

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). A more→ll duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 3 metre

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Mode more→l No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one e more→nd (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 7.7mm. Size ø91.5mm. Fits saddle ø90-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: ø91.5mm. • Fits saddle ø90-95mm. • Model No. JP12Technical Specification:Nett Weight: 0.055kgJack Pad Size: ø91.5mmStyle: Type BProfile Depth: 7.7mmTo Fit Saddle Size: ø90-95mmWeight: 0.055kgDimensions: Length: 10mm x Height: 190mmWeight: 0.06KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other more→trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 12 more→TonneHydraulic Lift: 150mmMaximum Height: 441mmMinimum Height: 231mmNett Weight: 6.4kgScrew Extension: 60mmTechnical Specification:Capacity: 12 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mmDimensions: Length: 140mm x Height: 240mmWeight: 6.6KgWarranty: 3 years

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance. more→• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied in a tough storage case and suitable for reco more→very trucks. The case prevents the jack from damaging other items and also prevents the spread of grease, oil or dirt. Features & Benefits: • Min./Max. Height: 175/339mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Tough storage case. • Model No. SJ2BMC Specifications: Model No SJ2BMC Brand: Sealey Capacity: 2 Tonne Hydraulic Lift: 116mm Maximum Height: 339mm Minimum Height: 175mm Nett Weight: 3.00kg Screw Extension: 48mm