only car jacksin all categories
only car jacks
United Kingdom

Car Jacks

 prices on 681 model  
£200
clear
Save List
Show
Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90 rotating pump and telescopic pump handle. Service kit readily available.
£83.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Trolley Jack / Max Load 2 t / Hubhöhe 330 mm
£83.99
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Stands lifting range of 10.75 inch to 16.75 inch Heavy duty jack saddle 360 degree swivel casters Jack has rotating 360 degree jack handle Trolley jack lifting range of 5.25 inch to 13 inch
£83.88
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.
from £64.95 up to £83.82 
Compare prices and buy Draper Beam Clamp, 1 Tonne
Mytoolshed.co.uk (United Kingdom) →
£65.00
Tooled-up.com  →
£65.00
Toolbee.co.uk (United Kingdom) →
£75.00
Electricalworld.com (United Kingdom) →
£84.00
Compare prices4→
• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…
£83.79
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
You may be interested in
Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Fitted with carrying handle.20 Tonne Bottle Jack• Min./Max. Height: 235/445mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• Fitted with carrying handle.• Model No. SJ20Model No: SJ20:Brand: Sealey:Capacity: 20 Tonne:Hydraulic Lift: 150mm:Maximum Height: 445mm:Minimum Height: 235mm:Nett Weight: 8.60kg:Screw Extension: 60mm:PTDSEASJ20
£83.58
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Bottle jack, with hydraulic unit, max. load 5 t, 2+ items. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Overall height from - to = 195 - 380 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£82.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lowering. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved. T238 Type: with case. Dimensions: 525 x 225 x 145mm. Maximum load: 2,000kg. Minimum height: 130mm. Maximum height: 380mm. T2.249 Type: with case. Dimensions: 695 x 344 x 180mm. Maximum load: 2,250kg. Minimum height: 145mm. Maximum height: 495mm. T280 Type: long reach. Dimensions: 1150 x 360 x 210mm. Maximum load: 2,000kg. Minimum height: 140mm. …
£81.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Professional quality bottle jack with a telescopic two stage hydraulic ram provides a much greater maximum while maintaining a low minimum height level.
£81.59
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Car Jack Draper Ratchet Axle Stands 3T
Draper Ratchet Axle Stands 3T
Type:repair stand
Mechanism:mechanical
Rise:up to 3 t, from 400 mm, up to 630 mm
Prices 6
Note: Image is for illustrative purposes only and may differ from the actual product
£79.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
2 Tonne capacity per pair, can raise wheels to 205mm. 215mm wide track. Enables safe working under the vehicle. Angle of incline 20 degrees.
£79.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
All articles about car jacks
What are homologated tyres?
Price decides? Is it worth buying Chinese tyres?
Crash course on the choice of winter tyres
The best mid-priced R17 summer tires for SUVs
Bottle jack, with hydraulic unit, max. load 3 t. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.
£79.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Bottle jack, with hydraulic unit, max. load 5 t, 4+ items. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Overall height from - to = 195 - 380 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£79.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £79.95
Compare prices and buy Sealey Lifting Strap 5m 5 Tonne LS5005
Mytoolshed.co.uk (United Kingdom) →
£80.00
Tooled-up.com  →
£80.00
Compare prices2→
• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…
from £59.95 up to £79.73 
Compare prices and buy Sealey Motorcycle Roll-in Wheel Clamp - Bolt Down
Tooled-up.com  →
£60.00
Electricalworld.com (United Kingdom) →
£80.00
Compare prices2→
A round magnetic stainless steel tray for securely holding tools and small parts. Helps to ensure that replacement components are not overlooked during repair or servicing. Will firmly attach to any ferrous metal surface.- Tough plastic cover protects magnetic base from damage- Dimensions 150mm dia 40mm deep- Tools & fasteners not includedPlease note - tools & fasteners are not includedPTDCLA7620052
£77.76
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
• Quickly and safely lifts and stabilises front or back of a motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions.• Features height adjustment and soft PVC sheath for protection to underside of bike.• Design of stand allows easy wheel maintenance and removal of front or rear wheel.• Minimum/Maximum Height: 200/275mm.• Unit Capacity of 200kg.Quickly and safely lifts and stabilises front or back of a motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel…
from £56.95 up to £77.54 
Compare prices and buy Sealey Two Arm Centre Stand
Mytoolshed.co.uk (United Kingdom) →
£57.00
Tooled-up.com  →
£57.00
Toolbee.co.uk (United Kingdom) →
£71.00
Electricalworld.com (United Kingdom) →
£78.00
Compare prices4→
Car Jack Yato YT-1713
Yato YT-1713
double ram
Type:bottle
Mechanism:hydraulic
Rise:up to 10 t, from 125 mm, up to 225 mm
Prices 1
£77.32
Idealo.co.uk
Delivery: in United Kingdom
Report
Idealo.co.uk
BLACK trapezoidal lift Capacity up to 1500kg Lifting capacity up to 1500kg Swivel rubber head included Quick lifting High-quality trapezoidal car lift with a manual drive, with a lifting capacity of up to 1500 kg. The working height is from 90 mm to 330 mm. The jack is designed for lifting passenger cars with a total weight not exceeding 1500 kg in order to replace the wheel. Its other advantages are ease and speed of operation as well as resistance to dirt. The device has a rotating head, and when folded, it takes up very little space Technical data lifting capacity:1500kg Minimum height :90mm Maximum height :330mm Libra :approx. 2kg
£77.24
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
Scissor Jack 2 ton suitable for VW models cars SUV Max. working stoke 320 - 440 mm. Min. lifting height (folded) 104mm. Max. lifting height (full lifted) 440mm Can be used with 17 mm socket, incl. comfort extension bar, ratchet with practical rotary knob for easy cranking up Includes storage bag Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley jacks.sers to reach and operate the jack in hard-to-access points, providing added convenience and versatility.
£76.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Scissor Lift Jack 2 ton suitable for BMW models cars, suitable for bigger models such as SUV Max. working stoke 320 - 440 mm. Min. lifting height (folded) 104mm. Max. lifting height (full lifted) 440mm The Jack can be used with 17 mm socket, incl. comfort extension bar, ratchet with practical rotary knob for easy cranking up The Kit contains: 2 Tonne Scissor Jack, speed ratchet, extension bar, storage bag Car Lift Jack Equipped with a practical rotating saddle including a BMW dedicated rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley jacks.sers to reach …
£76.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity. Clevis style base provides added versatility Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength. Fits most garage/shop cranes, engine hoists, and more Glide-action pressure pump is designed to lift with minimal effort. Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits International products have separate terms, are sold from abroad and may differ from local products, including …
£76.54
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.
from £69.95 up to £82.40 
Compare prices and buy Draper Car Ramps, 2.5 Tonne (Pair)
Mytoolshed.co.uk (United Kingdom) →
£70.00
Tooled-up.com  →
£70.00
Electricalworld.com (United Kingdom) →
£76.00
Toolbee.co.uk (United Kingdom) →
£82.00
Compare prices4→
24 more item(s)
1 ... 11 12 13 14 15 ... 29
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height
Got ideas or questions about filters? Click here!
Models