Car Jacks

Wheel Removal-Lifter Trolley 80kg Quick Lift Long reach bottle jack type mechanism. Quick Lift feature reduces the time and effort needed to raise arms to contact point. Steel construction with friction mounted roller arms. Front and rear castors for easy manoeuvrability. Adjustable width, 300 or 360mm between rollers, gives greater flexibility. Supplied with safety bar to prevent wheel from tipping forward. Specifications Make: Sealey Model No.: WD80 EAN: 5051747505742 Maximum Lifting Capacity: 80kg Minimum Lifting Height: 105mm Maximum Lifting Height: 930mm Width Between Rollers: 300, 360mm Roller Length: 280mm For Warranty see: Sealey Warranties Standard delivery: 1-2 days Instructions…

Wheel Removal Trolley 500kg Yankee Suitable for changing wheels and tyres on the very largest vehicles. 8 Position adjustable roller width ranging from 440 to 780mm giving greater flexibility. Load arms incorporate smooth roller action sleeves allowing wheel to be rotated for lining up on studs. Foot operated hydraulic mechanism with dead man's control release. Mounted on two castors and two fixed wheels for stability and easy manoeuvrability. Supplied with safety chain. Specifications Make: Sealey Model No: W508T Maximum Lifting Capacity: 500kg Minimum Lifting Height: 50mm Maximum Lifting Height: 640mm Width Between Rollers: 440, 496, 560, 610, 668, 724, 780mm Roller Length: 620mm For …

This item is part of the Sealey Tool Promotion which ends on 31st March 2022 Wheel Removal Trolley 1200kg Capacity Eight adjustable rollers (4 each side) allow for easy turning of large deep tread tyres. Extra large jacking handle and hydraulic foot pedal allows for one man operation. Safety bar with composite guard goes around wheel to ensure stability during transportation. Locking mechanism allows rollers to be fixed at eight preset positions. Mounted on two locking and two non-locking swivel castors for improved stability and easy manoeuvrability. Ideal for use on agricultural and commercial wheels and tyres. Specifications Make: Sealey Model No.: W1200T EAN: 5051747582361 Maximum …

Ratchet type axle stands, with cast iron support posts. Features angled teeth in posts, which prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs.Model No:VS2006Capacity Each:6tonneCapacity Pair:12tonneMinimum Height:380mmMaximum Height:595mm

MOT COMPLIANT - Fully Certified and approved to comply with MOT requirements.
SAFETY LOCK - Three stage mechanical safety lock prevents accidental injury.
WIDE REACH - Meets MOT recommendation for lifting on jacking point.
ROLLER WHEELS - Allows easy movement up and down the lift or inspection pit.
TWO YEAR GUARANTEE FROM A REPUTABLE UK COMPANY – Founded in 1978, Sealey is a large family run business with a vast product range. Trusted by professionals, all Sealey products are thoroughly tested and backed by unrivalled aftersales service.

MOT COMPLIANT - Fully certified and approved to comply with MOT requirements.
SAFETY LOCK - Three stage mechanical safety lock prevents accidental injury.
WIDE REACH - Meets MOT recommendation for lifting on jacking point.
ROLLER WHEELS - Allows easy movement up and down the lift or inspection pit.
TWO YEAR GUARANTEE FROM A REPUTABLE UK COMPANY – Founded in 1978, Sealey is a large family run business with a vast product range. Trusted by professionals, all Sealey products are thoroughly tested and backed by unrivalled aftersales service.

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Crutch supports adjustable for height and overall width. Fitted with four Ø90mm locking nylon castors.Model No:VMD001Minimum Height:315mmMaximum Height:495mmHeight Increments:4 x 45mmMinimum Support Width:350mmMaximum Support Width:1450mmWidth:1500mmCapacity:900kg

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Model No:PT1000Capacity:1000kgTest Load:1500kgTrack Width Adjustable Range:64-140mmMinimum Curve Radius:1000mmA:255mmB:127.5mmC:127.5mmD:104mmE:128mmWeight:13kgMinimum Standard I-Beam Dimensions (D x W x Web):125 x 75 x 5.5mmMaximum Distance Between Spans:2500mmMaximum Standard I-Beam Dimensions (D x W x Web):250 x 125 x 7.5mmMaximum Distance Between Spans:6000mmRefer to catalogue for diagram

Chamfered base design for compact light-duty trolley jacks. Designed to avert damage to the sill and underside of a vehicle when in use. Made from durable and robust rubber. The slotted rubber feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with trolley jacks with 38-55mm diameter saddles.

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.

Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height. Features and Benefits • Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubber-faced support pads adjust for height. • Fitted with four Ø150mm nylon castors. • Max. Width: 1485mm. • Min./Max. Height: 300/390mm. • Model No. RE89 Specifications Model No RE89 Brand: Sealey Nett Weight: 26.00kg Minimum/Maximum Height: 300/390mm Maximum Width: 1485mm Capacity: 2to…

Manufactured to exacting standards and suitable for general workshop applications. Model features dead man's handle for added safety and strong construction for durability. This economy hydraulic unit is slightly smaller than other models in the range. Can be fitted with Adjustable Gearbox Support - check specification in table.

Heavy-duty trailer jack with swivel mount used to jack trailer into position. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Height adjustment handle for ease of use. Zinc-plated finish helps resist corrosion. Load bearing capacity 900kg.|Travel height: 254mmMaximum load capacity: 900kgWeight (net): 5.1kg

This low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to prevent damage to the underside of the vehicle. It is fitted with rear-swivelling, hard-wearing nylon wheels to give quiet and smooth operation and prevent damage to garage and workshop floors. Features and Benefits • A low profile trolley jack designed for domestic and light-duty commercial use • Enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm • The trolley jack has a twin p…

Contains essential tools required when replacing the timing chain. Contents include crankshaft pulley hub holding tool and camshaft position sensor positioning tool. Supplied in a storage case with instructions and a warning tag. Features and Benefits • Contains essential tools required when replacing the timing chain. • Contents include crankshaft pulley hub holding tool and camshaft position sensor positioning tool. • Supplied in a storage case with instructions and a warning tag. • Model No. VSE5001 Specifications Model No VSE5001 Application(s): Vauxhall: Corsa E (15-18) Brand: Sealey Engine Codes: 1.3 CDTi: LKU/B13DTR, LKU/B13DTE, LKV/B13DTC EOM Tool(s): Vauxhall: KM-662-C, EN-5051…

Tyre & Wheel Handling Dolly 127kg Capacity Enables commercial sized wheels and tyres to be removed from/installed on hub studs. Specifications Make: Sealey Model No.: TH002 Capacity: 127kg Fork Centres: 535mm Length: 1255mm For Warranty see: Sealey Warranties Standard delivery: 1-2 days

Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Features and Benefits • Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm. • Model No. TB373 Specifications Model No TB373 Brand: Sealey Capacity: 900kg Maximum Height: 480mm Minimum Height: 230mm Nett Weight: 4.62kg

This tyre storage and transport dolly from Sealey is the perfect addition to any automotive garage. Capable of storing and moving up to 8 tyres in one go, the high-quality TPR swivel castors provide smooth and effortless manoeuvrability.Holds up to 8 tyresEffortless manoeuvrabilityWith a total weight capacity of 136kg, this heavy-duty dolly is perfect for speeding up the transportation of tyres around a busy garage. A brake installed on one of the castors ensures you always stay in full control.

Jacking Beam Yankee 3tonne with Arm Extenders & Flat Roller Supports 3tonne Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point. Specifications Make: Sealey Model No.: SJBEX300 Capacity: 3tonne …

Jacking Beam Yankee 2tonne with Arm Extenders & Flat Roller Supports 2tonne Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point. Specifications Make: Sealey Model No.: SJBEX200 Capacity: 2tonne …

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cm Features and Benefits • Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped …

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Ideal for workshops/garages where level lifting is essential. Fitted with four swivel locking castors. Gantry crane is NOT to be moved while loaded. All steel construction with 'I-beam' cross member for added strength. Height-adjustable from 2400 to 3600mm in 100mm increments. Ideal for maintenance, manufacturing, repairs and other material handling tasks. Quick assembly and disassembly for easy transport within a workplace or from site to site. Lifting tackle not included. Features and Benefits • Portable adjustable gantry crane is ideal for shops where level lifting is essential. • Maximum Load Capacity: 1 Tonne. • Four swivel locking castors. • Height-adjustable from 2400 to 3600mm in 100mm…