Car Jacks

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Single-piece hydraulic unit with heavy chassis design. Integral American cog-type release mechanism and long 2-piece handle. Heavy-duty castors and large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Supplied with a pair of ratchet type axle stands, 3tonne (3000kg) capacity per stand (6tonne (6000kg) per pair). Ideal for loaded vans up to 3.5tonne GVW.

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5tonne GVW.

European style trolley jacks manufactured to exacting standards. Lift-and-twist 'Dead Man' mechanism operates via 'D' shaped handle and prevents accidental lowering; lowers rapidly without load and provides smooth, slow, controlled lowering with load. Nylon wheels fitted for quiet operation and prevention of damage to garage floors. Foot pedal for quick lifting of saddle to the vehicle jacking point. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools. Features a low profile lifting arm and extended access platform for use on low slung vehicles.

European style trolley jack manufactured to exacting standards. Lift-and-twist 'Dead Man' mechanism operates via 'D' shaped handle and prevents accidental lowering; lowers rapidly without load and provides smooth, slow, controlled lowering with load. Nylon wheels fitted for quiet operation and prevention of damage to garage floors. Foot pedal for quick lifting of saddle to the vehicle jacking point. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools.

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEO - Trolley Jack 2tonne Low Entry Short Chassis - Orange AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEHV - Trolley Jack 2tonne Low Entry Short Chassis - Hi-Vis Green AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive You may also refer to the individual Model No. for full specification.

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEB - Trolley Jack 2tonne Low Entry Short Chassis - Blue AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive You may also refer to the individual Model No. for full specification.

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LE - Trolley Jack 2tonne Low Entry Short Chassis - Red AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead man's control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Profiled lifting arm gives low clearance height of just 85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended.

Made primarily for the motor racing enthusiast, this jack weighs in at just 15.1kg. Mix of steel and aluminium not only makes this jack lightweight but incredibly strong. Large saddle with jacking pad. Rocket Lift with twin piston design enables saddle to be brought up to jacking point with minimal pumps. Features a lifting bar for fast, lightweight pick-up.

Telescopic 2-stage model for reduced clearance lifts. Featuring high speed lift to gearbox - just lift piston. Foot pedal operation keeps hands-free. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Highly manoeuvrable on castors.

Universal Engine & Gearbox SupportDesigned to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etcRemoves the need for using cranes, transmission jacks etcUniversal tool designed for all makes of vehicle - No need for costly model specific bracketsThe unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support armsFully adjustable in all dimensions:- Extension: Min 630mm / Max 960mm- Support Plate Adjustment: 190mmSpare Parts:38360000-01 - Support Pad & Adjustable Bar

Air hydraulic jack. Silent air pump; less than 70 dB Rubber coated, ergonomically designed handle for operator comfort Safety lowering control valve for safe lowering even under maximum load Silent wheels and easy manoeuvring Min. height 150 mm Long reach chassis improves access to lifting points deep under vehicles Note: Image is for illustrative purposes only and may differ from the actual product

HI JACK HEAVY DUTY BASE ASSEMBLY

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.4 Tonne Telescopic Bottle Jack• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• Model No. SJT4Model No: SJT4:Brand: Sealey:Capacity: 4 Tonne:Hydraulic Lift: 170mm:Maximum Height: 390mm:Minimum Height: 160mm:Nett Weight:

The SJBEX200 features a two-stage mechanical safety lock and telescopic finger guard to prevent injury. This combined with a wide lift function that is fully certified and approved to VOSA requirements makes it ideal for lifting vehicles on a ramp. The beam has spring loaded flat arms with roller bearings and when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp and firmly stabilise the unit. Completing this jacking beam is a solid construction allowing it to be able to support up to 2 tonnes in weight.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle.8 Tonne Bottle Jack• Min./Max. Height: 222/447mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2pc handle.• Model No. SJ8Model No: SJ8:Brand: Sealey:Capacity: 8 Tonne:Hydraulic Lift: 145mm:Maximum Height: 447mm:Minimum Height: 222mm:Nett Weight: 4.8kg:Screw Extension: 80mm:PTDSEASJ8

This 50 Tonne Bottle Jack is fully tested and fitted with an overload valve to comply with the latest CE directives, whilst the cast base with threaded components allows for easy disassembly.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 3-piece handle. Fitted with carrying handle.30 Tonne Bottle Jack• Min./Max. Height: 260/420mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 3-piece handle.• Fitted with carrying handle.• Model No. SJ30Model No: SJ30:Brand: Sealey:Capacity: 30 Tonne:Hydraulic Lift: 160mm:Maximum Height: 420mm:Minimum Height: 260mm:Nett Weight: 17.8kg:Screw Extension: n/a:PTDSEASJ30

This 30 Tonne Bottle Jack is fully tested and fitted with an overload valve to comply with the latest CE directives, whilst the cast base with threaded components allows for easy disassembly.