Car Jacks

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. Extra-large jacking handle allows for one-person operation. Wheel support bar with composite guard goes around wheel to ensure stability during transportation. Locking mechanism allows rollers to be fixed at eight preset positions. Mounted on two locking and two non-locking castors for improved stability and easy manoeuvrability. Ideal for use on agricultural and commercial wheels and tyres. Features & Benefits: • Min./Max. Wheel Diameter: Ø1000/2000mm. • Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. • Extra-large jacking handle allows for one-person operati…

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Heavy-duty 7 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

Unitec 10929 Scissor Jack 1000 kg
Lifting capacity up to 1000kg
Hub Height 95mm - 325mm
Crank
Execution 1,0 Tons Of

Jabra 8800-01-46 headphone/headset accessory Cable

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 31.7mm. Size ø157mm. Fits saddle ø138-142mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 31.7mm. • Size: ø157mm. • Fits saddle ø138-142mm. • Model No. JP07Technical Specification:Nett Weight: 0.13kgJack Pad Size: ø157mmStyle: Type AProfile Depth: 31.7mmTo Fit Saddle Size: ø138-142mmWeight: 0.13kgDimensions: Length: 20mm x Height: 280mmWeight: 0.4KgWarranty: Consumable

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.