Powerline Adapters

LevelOne Industrial Gigabit PoE Injector, 36W, 802.3at/af PoE

Zyxel POE12-60W 5 Gigabit Ethernet

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using a standard Ethernet cable.30 Watt Power Budget:- Provides up to 30W of power (midspan) to IEEE 802.3af (PoE / Type 1) and IEEE 802.3at (PoE+ / Type 2) powered devices (PD) like:- Cameras- SensorsWi-fi access points:- Uses Cat 5e (or higher rated) Ethernet cabling.Designed for Harsh Environments:- Industrial features include -40 C to 75 C operating temperature, IP-30 rated housing, vibration, shock, and free-fall standard testing.- Vibration: EN 60068-2-6- Shock: EN 60068-2-27- Free-fall: EN 60068-2-32- 600,000+ hours MTBF rating using Telcordia/Bellcore at 50C for long-term …

Ubiquiti Networks POE-24-30W-G-WH 24V Gigabit Ethernet PoE Injector and Adapter.Specifications:Connection:- Ethernet interface type: gigabit ethernet- Ethernet LAN, data transfer rate: 10,100,1000 Mbit/s- Power over Ethernet (PoE): Yes- Certification: CE, FCC, IC, ULPorts and Interfaces:- Ethernet LAN (RJ-45) number of ports: 2Energy control:- Power over Ethernet (PoE): 24V- Output power: 30W- Input voltage: 100 - 240V- input frequency: 50/60hz- Input current: 0.4/0.6A- Suitable for use in country/location: EuropeEnvironmental conditions:- Operating temperature range: 0 - 40°C- Relative Humidity Range for Operation: 35 - 95%- Storage temperature range: -30 - 70°CWeight and measurements:- Broad: 94…

Minimize cabling for wireless APs, IP phones, or any other PoE compatible device!- Meets the 802.3af PoE standard- 48V output voltage, 15.4 Watt- Cable connection: 10/100/1000 Mbps- Power consumption: 1.6W max.The Digitus PoE Injector minimizes your cabling when installing PoE compatible devices such as IP network cameras. Only the Ethernet cable is used for the data feed and power supply for the devices. This eliminates the need to install a separate power line, and you can extend your network where there are no power outlets or power lines. The injector is fully compliant with the IEEE 802.3af PoE standard and delivers output power of up to 15.4W.Technical Details:- Meets the 802.3af PoE standard- …

Axis 5026-202 PoE adapter Gigabit Ethernet

The LevelOne POI-2002 is a Power over Ethernet injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deployment on the existing LAN infrastructure. With the use of power injectors, DC power of up to 15.4W and the data that comes from a non-PoE switch are merged together and then transmitted to the 802.3af compliant products such as PoE dome cameras through the Ethernet cabling. Hence, preserving your investment in hardware upgrade without the need for buying extra PoE switches. Furthermore, non-PoE devices like wireless access points can also be powered up remotely by adding additional PoE splitters, since power and data are further …

PLANET POE-163 PoE adapter Fast Ethernet, Gigabit Ethernet 53 V

Extend the range of a PoE connection!

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater Model 560962 is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply as it draws the power it needs from the PoE input.

Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect; e.g. a VoIP phone or a PoE network camera. That's it. There is nothing …