Car Jacks

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

• Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism).• While raising, the lift can be stopped at any height before locking the vehicle out level.• Once raised, it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle).• Three adjustable width settings (775mm/1130mm/1530mm) allows narrow chassis cars to be lifted, such as MGs and other small classic cars. • Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure.• …

• Heavy-duty 7 Tonne short axle stands.• Sturdy welded steel construction for superior safety and strength.• Large crutch for good load distribution.• Supplied with captive pin load support.• Suitable for use with forklifts and vehicles with low suspension.• Sold in pairs.Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs.• Min./Max. Working Height: 244/354mm. • Capacity: 14tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low …

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Profiled lifting arm gives low clearance height of just 85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended.

• Suitable for changing wheels and tyres on large vehicles.• 8-Position adjustable roller width ranging from 440-780mm, giving greater flexibility.• Load arms incorporate smooth roller action sleeves allowing wheel to be rotated for lining up on studs.• Foot operated hydraulic mechanism with dead man's control release.• Mounted on two rear locking castors and two front castors for stability and easy manoeuvrability.• Supplied with safety chain.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Suitable for changing wheels and tyres on large vehicles. 8-Position adjustable roller width ranging from 440-780mm, giving greater flexibility. Load arms inc…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• LARGE CAPACITY - Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling).• VERSATILE - Four adjustable support arms can be easily positioned to fit many shapes and sizes.• PROTECTION - Rubber pads protect the tank while being supported.• SAFE - Includes two load restraint straps.Technical SpecificationCapacity: 565kgCompatibility: ADT3, ADT5, ADT7, 500TTJ, 800TTJNett Weight: 25kgTechnical Specification:Capacity: 565kgDimensions: Length: 440mm x Height: 125mmWeight: 23.48KgWarranty: 1 year

• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification:Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.