Car Jacks

This low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to prevent damage to the underside of the vehicle. It is fitted with rear-swivelling, hard-wearing nylon wheels to give quiet and smooth operation and prevent damage to garage and workshop floors.Contents:1 x Low Profile Trolley Jack, 2 TonneCapacity: 2 TonneSaddle diameter: 100mmHandle length: 1,000mmChassis length: 575mmWeight: 23.5kgMin height: 85mmMax height: 430mmAdditional Information:Capacity: 2 Tonne

Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand. Features & Benefits: • Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to all mechanical components at the front of the bike is made easy. • Stand folds down for compact storage when not in use. • Pin Sizes: 13, 15, 16.5, 17, 18mm. • Model No. FPS5 Specifications: Model No FPS5 Brand: Sea…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 4m x 50mm, 1 Tonne

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.Model No:1020LECapacity:2tonneMinimum Saddle Height:86mmMaximum Saddle Height:380mmMaximum Chassis Height:125mmLength:560mmWeight:12.6kg

Replacement hydraulic ram for SPC2000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28 Specifications: Model No SPC2000.28 Brand: Sealey Nett Weight: 17.5kg Ram Capacity: 8000kg Ram Diameter: 37.89mm Ram Travel: 624mm Pump Type: Twin Speed Ram Pin Hole Diameter: 22.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 797mm** Overall Length (Min.): 855mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Manufactured from 3.5mm steel section. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved. Features & Benefits: • 2 Tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000 Specifications: Model No CAR2000 Brand: Sealey Capacity Pair: 2000kg Maximum Tyre Width: 200mm Nett Weight: 14.35kg Overall Dimensions (L x W x H): 800 x 345 x 250mm Ramp Height: 190mm

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size 136.5mm. Fits saddle 136.5mm.

All steel scissor type construction with foot operation and integral hydraulic pump. Unique foot design and safety pins allow use with off-road/trials bikes. Features three locking heights. Support platform with rubber top protects paintwork on bike. Features & Benefits: • Min./Max. Height: 355/895mm. • Table Width/Length: 350/410mm. • All steel scissor type construction with foot operation and integral hydraulic pump. • Unique foot design and safety pins allow use with off-road/trials bikes. • Features three locking heights. • Support platform with rubber top protects paintwork on bike. • Model No. MC135 Specifications: Model No MC135 Brand: Sealey Nett Weight: 32.39kg Capacity: 135kg Minimum …