Car Jacks

Protective Rubber Pad for Trolley Jack 1pcs Universal Car Rubber Pad Size:65 x 33 Made of high quality rubber, will not damage the vehicle. Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Spacious - with total dimensions of 60 x 90 x 202 cm. Two shelves. A storage grille and pull-out storage rails with tension straps Load capacity - supports a total load up to 220 kg Mobile – thanks to four PU steering wheels with two brakes and modular construction Efficient - creates more order and saves paths in any body workshop

Professional hydraulic, low-profile lift. Capacity 2500 kg. Lifting range 80 - 365 mm. THICK profiles.When you buy from Elektro-Mar, you buy from a trusted seller ✅Item descriptionCar lift with a lifting capacity of 2500 kg. The sheet is joined into special profiles that increase the rigidity of the structure. The lift is equipped with steel wheels of the front axle and steering wheels of the rear axle, as well as an integrated control valve with control in the lift lever. The lift is recommended for operating various types of motor vehicles. A hydraulic cylinder operating in the horizontal axis and low construction profiles allow work in the range of 80 to 360 mm…

The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability, simple to operate lock/unlock valve for raising and lowering, rubber contact pad to prevent chassis damage and extra wide wheels for safe, stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets, suitable for a wide range of wheel nuts, meaning the CTJ2250LP is not only ideal for garage use, it’s the perfect jack for quick wheel changes in emergency situations.

Protective Rubber Pad For Axle Jack Stands | Universal for trestles with a support width of 28 mm Suitable for the trestle saddle, easy to mount | Perfect Fit for 3 Tonne Axle Jack Stand HEYNER (347430) High quality rubber Suitable for article 347430 HEYNER Stand Jack 3 Ton. Stand Jack isn't included!!! Brand: HEYNER Germany

Bottle jack, with hydraulic unit, max. load 5 t, 2+ items. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Overall height from - to = 195 - 380 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle

Max Load 0.7 t

Air/Hydraulic bottle jack capable of both air assisted or manual operation. Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90° rotating pump and telescopic pump handle and has moulded carry handles incorporating storage for the pump handle. Service kit readily available.

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Max Load 10 t / Hubhöhe 390 mm

Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lowering. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved. T238 Type: with case. Dimensions: 525 x 225 x 145mm. Maximum load: 2,000kg. Minimum height: 130mm. Maximum height: 380mm. T2.249 Type: with case. Dimensions: 695 x 344 x 180mm. Maximum load: 2,250kg. Minimum height: 145mm. Maximum height: 495mm. T280 Type: long reach. Dimensions: 1150 x 360 x 210mm. Maximum load: 2,000kg. Minimum height: 140mm. …

Car Scissor Jack / Lift Jack With Ratchet For easy use Quick Car Lift Jack| Car Jack available Sizes: 1 ton, 1.5 ton & 2 tons. Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Portable Lift Jack is designed for safely lift a car for maintenance or tire changes Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany

VEVOR Hydraulic Bottle Jack, 20 Ton/44092 LBS All Welded Bottle Jack, 240-450 mm Lifting Range, with 3-section Long Handle, for Car, Pickup Truck, Truck, RV, Auto Repair, Industrial EngineeringSmall But PowerfulPremium MaterialEasy to OperateMaintenance MethodCompact and PortableWide ApplicationsItem Model Number: QJD-01-020A,Max. Capacity: 44092 lbs/20 Ton,Net Weight: 21.2 lb/9.6 kg,Lifting Range: 9.4-17.7 inch/240-450 mm,Product Size: 6.2×5.5×9.4 inch/157×140×240 mm

Travel jack, wheels with polyurethane tyres, max. load 1000 kg, lift 33 mm. Supplied = assembled. Lift = 33 mm. Max. load = 1000 kg. Frame material = steel. Wheel diameter = 136 mm. Wheel type = wheels with PU tyres. Footplate height max. = 45 mm. Footplate height min. = 12 mm. Scope of delivery = 2 castors, 1 lifting mechanism. Product type = furniture transport units. Application = diverse. For moving heavy cupboards, tool cupboards and machines, even when loaded. Easy and fast system with little force required. Extremely handy due to a compact design. Move heavy loads with just a few hand movements: lift using the lifting rod and then push the hook of the roller underneath - finished. The

Lifter, with hydraulic unit, type V10, max. load 10 t. Supplied = assembled. Max. load = 10 t. Lifting range with lifting head = 310 - 470 mm. Lifting range with lifting toe = 20 - 180 mm. Lift = 160 mm. Max. load with lifting head = 10 t. Max. load with lifting toe = 10 t. Weight = 32 kg. Product type = hydraulic jacks. Can also be used where space is tight due to the compact design. High quality, compact steel construction. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations, for the workshop or for outdoor use - the high quality materials mean this lifting device can be used …