Car Jacks

Featuring steel chassis for stability, swivel castors for easier positioning and 1 piece handle with rubber grip for extra comfort. With overload protection valve, separate release mechanism and integral carry handle. STJ330 (2 tonne): Max load: 2000kg Min height: 135mm Max height: 330mm Weight: 8.5kg STJ410 (3 tonne): Max load: 3000kg Min height: 130mm Max height: 410mm Weight: 15.84kg

Versatile lifting range low entry minimum saddle height 100mm maximum saddle height 535mm. Twin piston rocket lift brings the lifting arm straight into contact with the jacking point with minimal pumps. Heavy-duty castors and extra-large saddle design allows ease of positioning under the vehicle protective jack handle sleeve to help prevent accidental damage to car bodywork when pumping the handle. Heavy-duty chassis with strengthening flanges along the side for extra torsional rigidity under load. Fitted with safety overload and pump-through valve preventing the handle locking at maximum ram extension.3 Tonne Low Profile Trolley Jack with Rocket Lift• Versatile lifting range low

This Clarke trolley jack benefits from an extra low saddle and frame as well as a slow release function for additional safety. Its rubber contact pad prevents damage to vehicles, while the rear swivel casters make manoeuvring the trolley jack easy without sacrificing stability. The nylon wheels and casters prevent marking on smooth garage floors.

Trolley Jack / Max Load 2 t / Hubhöhe 460 mm / Unterfahrhöhe 85 mm / 20.5 kg

Note: Image is for illustrative purposes only and may differ from the actual product

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification.

Rubber Pad for trolley jack and lifting stage Easy to use and fits most of the trolley jacks and vehicle lifts (e.g. Unitec, Michelin). Non-slip protected by V Groove and waffle pattern. The scoop on the bottom of the rubber buffer ensures a steady hold on the Car Jack Plate. Diameter: 38/65 mm, robust material. Good quality The item was recommended as a bundle, but does not fit the stand ordered. - The jacking rubber pad is perfectly suitable for various body types and jacks (e.g. cartrend, UNITEC, MICHELIN, GOODYEAR etc)

Professional quality bottle jack with a telescopic two stage hydraulic ram provides a much greater maximum while maintaining a low minimum height level.

Lifter, with hydraulic unit and nickel plating, type V10, max. load 10 t. Supplied = assembled. Max. load = 10 t. Lifting range with lifting head = 310 - 470 mm. Lifting range with lifting toe = 20 - 180 mm. Lift = 160 mm. Max. load with lifting head = 10 t. Max. load with lifting toe = 10 t. Weight = 32 kg. Product type = hydraulic jacks. Specifically for cleanrooms (foodstuffs, pharmaceuticals, etc.). Can also be used where space is tight due to the compact design. High quality, compact steel construction fully nickel plated. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations,…

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The EVOcrk is a professional quick-lift hydraulic jack designed for rally car use. Weighing only 3.5kg the EVOcrk folds up to a compact package when not in use so can easily be stored in the rally car.Operation of the jack is simple, an adjustable height 22mm diameter pin inserts into a tube on the car body. Pump the handle and the car lifts, it takes only 9/10 strokes to reach the full height of 610mm. The base of the jack is made from a durable polymer with a grippy rubber sole so it provides support and grip on most surfaces. The base also swivels to account for the jack angle changing as the car is raised or lowered.  Technical Specifications Base Adjustable for extra

This fast lifting jack is built for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors.- Saddle height: Min 136mm. Max 465mm- Lifting Capacity: 3 Tonnes- Automatic overload protection- Extra strong long 2 piece handle- Simple twist lock/unlock valve- Dimensions (LWH): 630 x 328 x 162mm- Weight: 29.5PTDCLA7623205

The WINNTEC® from SIP 20 TON Air Bottle Jack offers easier and safer lifting of vehicles both large and heavy, by providing powerful air-assisted performance horizontally and vertically and lifting up to 475mm along with a versatile 80mm screw extension. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 245mm to 475mm lifting height range 80mm screw extension for improved versatility Designed for horizontal and vertical operation Aluminium air motor for heavy-duty performance WINNTEC® from SIP 3-Year Warranty

HYDRAULIC POST LIFT 5T KELTIN PRODUCT DESCRIPTION: The KELTIN post lift is an ideal solution used in car workshops as well as in home garages. A simple, solid construction increases the reliability of the device. Small size guarantees ease of use and high mobility. A screw-in pin is used for maximum lifting height. TECHNICAL DATA: lifting capacity: 5000 kg min. height: 170mm height max.: 320mm GOODS FEATURES: Libra 3.5 kg Bar code K00123