Car Jacks

Suitable for small capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 5m x 120mm, 4 Tonne

Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°. Features & Benefits: • Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for use on sloped ground over 10°. • Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. • Dimensions (W x D x H): 200 x 94 x 65mm. • Model No. WC16

Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included. Features & Benefits: • Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250 Specifications: Model No PH250 Brand: Sealey Capacity (Double Cable): 250kg Capacity (Single Cable): 125kg Current: 2.2A Group of Mechanisms: M1 Insulating Grade: B IP Rating: IP54 Lift Height (Double Cabl…

Heavy-duty steel plate with rust resistant finish. Fitted with four Ø75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm widths. Suitable for use in bodyshops and workshops. Features & Benefits: • Can handle up to 250mm widths. • Fitted with four Ø75mm metal castors, two lockable. • Heavy-duty steel plate with rust resistant finish. • Each dolly features a side handle for easy carrying. • Suitable for use in bodyshops and workshops. • Model No. WS681

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

Package includes: Model Number - Description TD284SD - Ratchet Tie Down 25mm x 4m Polyester Webbing with S-Hooks 800kg Breaking Strain TDMCHB - Tie Down - Motorcycle Handlebar TDMCRW - Tie Down - Motorcycle Rear Wheel WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down Features & Benefits: Package includes: • Model Number - Description • TD284SD - 25mm x 4m Polyester Webbing Ratchet Tie Down with S-Hooks 800kg Breaking Strength • TDMCHB - Tie Down - Motorcycle Handlebar • TDMCRW - Tie Down - Motorcycle Rear Wheel • WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down • Model No. MTC01 Specifications: Model No MTC01 Brand: Sealey

Ratchet type axle stands, with cast iron support posts. Features angled teeth in posts, which prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 395/600mm. • Capacity: 12 Tonne per pair. • Ratchet type with cast iron support post. • Tough steel plate welded base. • Sold in pairs. • Model No. VS2006

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. Contents: 2 x Chains Specifications: Capacity: 500kg Min. width: 730mm Max. width: 1,480mm Adjustable screw height: 0-205mm Overall beam length: 1,500mm Chain quantity: 2 Weight: 17kg

Replacement hydraulic ram for SPC2000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28 Specifications: Model No SPC2000.28 Brand: Sealey Nett Weight: 17.5kg Ram Capacity: 8000kg Ram Diameter: 37.89mm Ram Travel: 624mm Pump Type: Twin Speed Ram Pin Hole Diameter: 22.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 797mm** Overall Length (Min.): 855mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre