Car Jacks

The Draper PJ50 Pneumatic Jack is a portable and compact twin stage pneumatic jack that is capable of lifting up to 50 tonnes. This jack is supplied with 45mm and 75mm height lift extensions which provide a maximum height of 450mm at stage 1 and 564mm at stage 2. You can use this product easily and safely thanks to its three stage adjustable ergonomic handle, equipped with a “Slow Down” valve and a “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as preventing damage to garage floors. This jack also has

The SJBEX300 features a two-stage mechanical safety lock and telescopic finger guard to prevent injury. This combined with a wide lift function that is fully certified and approved to VOSA requirements makes it ideal for lifting vehicles on a ramp. The beam has spring loaded flat arms with roller bearings and when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp and firmly stabilise the unit. Completing this jacking beam is a solid construction allowing it to be able to support up to 3 tonnes in weight.

A set of 4 Gojak vehicle moving jacks that comes with a FREE storage rack. The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction. 2 Jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform.FREE movable storage rackSet of 4 jacks for easy vehicle movement in confined spacesChoice of jack model to suit various vehicle typesEasy 1 person operationTo operate the Gojak mechanical leverage applied by the foot pedal progressively squeezes the vehicle tyre between the

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification.

Telescopic 2-stage model for reduced clearance lifts. Featuring high speed lift to gearbox - just lift piston. Foot pedal operation keeps hands-free. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Highly manoeuvrable on castors.

Lifter, without a hydraulic unit, type V5, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 252 - 392 mm. Lifting range with lifting toe = 15 - 165 mm. Lift = 140 mm. Max. load with lifting head = 5 t. Max. load with lifting toe = 5 t. Weight = 17 kg. Product type = hydraulic jacks. Can also be used where space is tight due to the compact design. High quality, compact steel construction. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations, in the workshop or for outdoor use - the high quality materials mean this lifting device can be used …

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. A comprehensive range of nine models, see logo beside each jack for main features and the table beside for detailed specification.

The Draper 02079 Pneumatic Jack is portable and compact, capable of lifting up to 40 tonnes. This twin stage jack is supplied with 45mm and 75mm height lift extensions, offering a maximum height of 343mm at stage 1 and 409mm at stage 2. You can use this product easily and safely thanks to its 3 stage adjustable ergonomic handle, equipped with a “Slow Down” valve and “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as preventing damage to garage floors. This jack also has industrial quality seals that help

The WINNTEC® from SIP 10 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usage via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 160mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty

Furniture mover, mechanical, pack of 2, max. load 600 kg, lift 300 mm. Supplied = assembled. Lift = 300 mm. Max. load = 600 kg. Frame material = steel. Frame colour = light blue RAL 5012. Width = 570 mm. Height = 775 mm. Depth = 400 mm. Wheel diameter = 125 mm. Wheel fittings = swivel castor. Wheel bearing = needle bearing. Wheel type = non-marking. Finish = plastic coated. Footplate width = 225 mm. Footplate depth = 120 mm. Load picked up from = floor and pallet. Lifting range = 5 - 300 mm. Product type = furniture transport units. Application = diverse. Ideal for moves, maintenance or fitting. Non-marking wheel tyres for protecting carpets and floors. Completely assembled and ready for immediate …

The SJBEX200 features a two-stage mechanical safety lock and telescopic finger guard to prevent injury. This combined with a wide lift function that is fully certified and approved to VOSA requirements makes it ideal for lifting vehicles on a ramp. The beam has spring loaded flat arms with roller bearings and when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp and firmly stabilise the unit. Completing this jacking beam is a solid construction allowing it to be able to support up to 2 tonnes in weight.

Note: Image is for illustrative purposes only and may differ from the actual product