Car Jacks

• Three pre-set jib positions for lifting • Single piston hydraulic pump for rapid lifting • Folding design optimises storage space • Six robust castor wheels for easy mobility • Fitted with twin safety overload valves • Compatible with a wide range of load slings and levellersThis robust engine crane has a maximum capacity of 1 Tonne. The single piston hydraulic pump ensures rapid lifting of an engine out of its bay with little effort. There are four pre-set jib positions, with a maximum capacity of 250kg when the jib is fully extended. The outrigger legs can be folded to optimise storage workshop space or for easy transportation. There are six robust castor wheels to allow safe and easy mob…

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting. - to protect and prevent damage to jacking points, side skirts and the underside of the vehicle.Technical SpecificationApplication(s): 1 Series: E81. E82, E87 1M.2 Series: F22, F23, F45, F46.3 Series: E46, E90, E91, E92, F31.4 Series: F32.5 Series: E39, E60, E61, E63, F07, F10, F11, M5.6 Series: E63, E64, F06, F13, M6.7 Series: E38, E65, E66, F01, F02.E84 X1, X3 E83, F25, X4, X5 E53, E70, X5M, E71 X6, X6MZ4, M-Roadster/Coupe E85, E…

• Designed to support the engine or gearbox when mountings or gearbox are being removed.• Ideal when replacing clutches or timing belts.• Removes the need for using a transmission jack or engine support beam.• Fully adjustable, making the unit suitable for most transverse and in-line configurations. • Fitted by suspending underneath the vehicle using support hooks which counter-balances against the underside of the vehicle.Designed to support the engine or gearbox when mountings or gearbox are being removed. Ideal when replacing clutches or timing belts. Removes the need for using a transmission jack or engine support beam. Fully adjustable, making the unit suitable for most transverse and in-lin…

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – achieve an optimal position effortlessly thanks to the three-position adjustable handle and two wheels on the pneumatic car jack
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder p…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1.5 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 31.4mm. Size ø140mm. Fits Saddle ø139-140mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 31.4mm. • Size: ø140mm. • Fits saddle ø139-140mm. • Model No. JP03Technical Specification:Nett Weight: 0.32kgJack Pad Size: ø140mmStyle: Type CProfile Depth: 31.4mmTo Fit Saddle Size: ø139-140mmWeight: 0.32kgDimensions: Length: 141mm x Height: 32mmWeight: 0.306KgWarranty: Consumable

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.