Effects Pedals

Portable bass preamp. Multi-purpose effects pedal and preamp for active and passive bass guitars, that's perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals. Controls include Bass, Drive, ground lift, highs, input pad, Mid, mid frequency, mode, mute, Pre/Post, volume. Robust steel housing. Powered by 9 V DC power supply (not included) or 9 V block. Dimensions: 100 x 100 x 55 mm. Weight: 0,36 kg. In a black finish.
Made in: …

Providing extensive sound shaping options for acoustic guitars and basses, the Acoustic Pocket Amp is a versatile preamp that‘s perfect for gigging, recording and practising. It accomodates both piezo and magnetic pickups, and the 3-band EQ with semi-parametric mid control is specifically tuned for acoustic instruments. The Pocket Preamp features an input limiter to prevent transient distortion while a 5-position rotary notch filter eliminates resonant frequency feedback. A mode switch selects between crisp contemporary or warm vintage sound characteristics, and a blend control allows you to mix the direct and processed signals.The Acoustic Pocket Amp provides an insert for external effects,…

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 800 x 390 x 70-85 mm. Weight Pedalbay: 6.88 kg. Accessories (included): 2x black elastic bands, approx. 5 m hook tape, soft carrying case with shoulder strap, allen key.
Type: Pedalboard
Made in: Germany
Colour: Black
Original Colour by Producer: Black;Black

Soft carrying case with shoulder strap, padded. Dimensions: 800 x 390 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Colour: Black
Padding: Yes
Made in: Germany
Type: Pedal Bag

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 600 x 390 x 70-85 mm. Weight Pedalbay: 5,15 kg. Accessories (included): 2x black elastic bands, approx. 3,5 m hook tape, soft carrying case with shoulder strap, allen key.
Made in: Germany
Type: Pedalboard
Colour: Black
Original Colour by Producer: Black;Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 605 x 305 x 70-85 mm. Weight Pedalbay: 4,62 kg. Accessories (included): 2x black elastic bands, approx. 3m hook tape, soft carrying case with shoulder strap, allen key.
Type: Pedalboard
Made in: Germany
Colour: Black
Original Colour by Producer: Black;Black

Soft carrying case with shoulder strap, padded. Dimensions: 600 x 390 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Type: Pedal Bag
Colour: Black
Padding: Yes
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 605 x 305 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Padding: Yes
Made in: Germany
Type: Pedal Bag
Colour: Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 500 x 135 x 35 mm. Weight Pedalbay: 2,46 kg. Accessories (included): 2x black elastic bands, approx. 1.5m hook tape, soft carrying case with shoulder strap.
Made in: Germany
Type: Pedalboard
Colour: Black
Original Colour by Producer: Black;Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 450x 305x 70-85mm. Weight Pedalbay: 3.8 kg. Accessories (included): 2x black elastic bands, approx. 2.5m hook tape, soft carrying case with shoulder strap, allen key.
Colour: Black
Type: Pedalboard
Made in: Germany
Original Colour by Producer: Black;Black

Soft carrying case with shoulder strap, padded. Dimensions: 450 x 305 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Padding: Yes
Made in: Germany
Colour: Black
Type: Pedal Bag

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Made in: Germany
UK/EU Power supply included: No
Type: DI Box

The Palmer Hook and Loop Fastener is a 1 metre strip of self-adhesive tape which is perfect for mounting devices on pedal boards.

Summing Amp

Ortega QUANTUMexp is an extension trigger module for Ortega QUANTUMloop. It allows you to control the drum samples from the sound bank B. After connecting it, you can control, for example, the kick with the left foot and the snare with the right foot. The lower part of the effect is anti-slip. Output connector 6.3 mm Jack. Made of solid mahogany wood.
Package Contents: Battery
Outputs: 6,3 mm Jack
Battery Operation: Yes
Made in: China
Colour: Natural

Analog percussion stomp box. Features comfortable, ergonomic design, non-slip bottom coating, 6,3mm (1/4") input jack, 6,3mm (1/4") output jack, discrete pass-trough to output, seamless volume control, built-in piezo. No battery or power supply needed.
Colour: Natural
Made in: China
Package Contents: Manual
Inputs: Mono
Controls: Volume
UK/EU Power supply included: No
Battery Operation: Yes
Outputs: Mono

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Made in: United Kingdom
Original Colour by Producer: Black;Black
Colour: Black
Type: Soft Case

The Orange Korgpressor Class A is a compressor pedal based on vintage-inspired optical studio units and delivers excellent compression with an ultra-smooth bloom. As well as offering a standard compression the Kongpressor provides up to 12 dB of clean boost also including an internal charge pump which doubles up the operating system to 18 V. Additional features include transparent buffered bypass which retains the natural tone of your set-up even while the pedal is disengaged for a well-rounded tonal experience – as well as a highly road-worthy chassis and stylish graphics. The Kongpressor is a must have for any guitarist and the perfect addition to any pedalboard.

Booster

Fuzz/octave effects pedal for electric guitar that is loosely based on the old Foxx Tone Machine which was a great fuzz from 1970. A version of this was later made by Prescription Electronics under the name Experience, which added a swell feature to the existing design. This Orange's pedal has an added adjustable Octave-up so that it can be turned down from being flat-out. This took a bit of redesigning and in doing so Orange has also managed to remove the DC offset from the Octave stomp switch, resulting in the octave being instantly engaged or disengaged. This is Orange's only True Bypass pedal, because fuzz effect is always better without a buffer placed in front of it as a passive pickup …

It’s a well-known fact that running two amps is not only enormous fun, but also a time-honoured way of achieving bigger tones on stage and in the studio. Whether it’s switching between two different amplifiers for their individual characteristics (rhythm and lead, for example) or using them simultaneously for huge walls of sound, pros have been employing this setup for decades. Achieving this easily, however, has always been a problem for guitar players.
Made in: China