Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 31.7mm. Size ø157mm. Fits saddle ø138-142mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 31.7mm. • Size: ø157mm. • Fits saddle ø138-142mm. • Model No. JP07Technical Specification:Nett Weight: 0.13kgJack Pad Size: ø157mmStyle: Type AProfile Depth: 31.7mmTo Fit Saddle Size: ø138-142mmWeight: 0.13kgDimensions: Length: 20mm x Height: 280mmWeight: 0.4KgWarranty: Consumable

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

• Replacement hydraulic ram for SPC1000 engine crane.Replacement hydraulic ram for SPC1000 engine crane.• Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28Technical Specification:Nett Weight: 13kgRam Capacity: 5000kgRam Diameter: 31.92mmRam Travel: 585mmPump Type: Twin SpeedRam Pin Hole Diameter: 18.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 706mm**Overall Length (Min): 763mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 100mm x Height: 110mmWeight: 12.972KgWarranty: Consumable

• Four pre-set jib positions for lifting • Single piston hydraulic pump for rapid lifting • Folding design optimises storage space • Six robust castor wheels for safe mobility • Fitted with twin safety overload valves • Compatible with a wide range of load slings and levellersThis robust engine crane has a maximum capacity of 2 Tonnes. The single-piston hydraulic pump ensures rapid lifting of an engine out of its bay with little effort. There are four pre-set jib positions, with a maximum capacity of 500kg when the jib is fully extended. The outrigger legs can be folded to optimise storage workshop space or for easy transportation. There are six robust castor wheels to allow safe mobility. Fo…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

Telescopic 2-stage model for reduced clearance lifts. Featuring high-speed lift to gearbox - just lift piston. Foot pedal operation keeps hands-free. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Castors for easy manoeuvrability. Features & Benefits: • Min./Max. Saddle Height: 962/1933mm. • Telescopic 2-stage model for reduced clearance lifts. • Featuring high-speed lift to gearbox - just lift piston. • Foot pedal operation keeps hands-free. • Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. • Castors for easy manoeuvrability. • This item is heavy. Extra assistance must be provided at the delivery point to help …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.