Car Jacks

• Steel tube chassis with four ø100mm nylon castors.• Pedal operated hydraulic lifting action with safety locking pin when under load.• Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profile.• Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface.• Note: Skates sold as singles, but must be used in pairs.Steel tube chassis with four ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profile. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs …

• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Fully certified and approved to comply with MOT req…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance.• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …

• Replacement hydraulic ram for PH20.V4 engine crane.Replacement hydraulic ram for PH20.V4 engine crane.• Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-ETechnical Specification:Nett Weight: 11.8kgRam Capacity: 8000kgRam Diameter: 33.9mmRam Travel: 502mmPump Type: Single SpeedRam Pin Hole Diameter: 16.4mmClevis Pin Hole Diameter: 16.4mmMounting Point Distance (Min.): 636mmOverall Length (Min.): 670mmBase mount Type: Double ClevisDimensions: Length: 130mm x Height: 125mmWeight: 11.852KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable

QLT450 2.5 tonne capacity. Made of a lightweight aluminium and steel construction. Its low profile makes it ideal for any type of car, including sports and race cars, and its swivel castor wheels enable easier positioning under vehicles. It also has a quick lift with dual pump and a rubber hand grip for user comfort. Dimensions 685 x 345 x 180mm.

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …