Car Jacks

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc pla more→ted steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Plea more→se note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are so more→fter than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2.5 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Des more→ign Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Height 8.3mm. Size ø99.5mm. Fits saddle ø99-103mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 8.3mm. • Size: ø99.5mm. • Fits saddle ø99-103mm. • Model No. JP16Technical Specification:Nett Weight: 0.075kgJack Pad Size: ø99.5mmStyle: Type BProfile Depth: 8.3mmTo Fit Saddle Size: ø99-103mmWeight: 0.075kgDimensions: Length: 10mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.