Car Jacks

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – achieve an optimal position effortlessly thanks to the three-position adjustable handle and two wheels on the pneumatic car jack
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder p…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• A low profile trolley jack designed for domestic and light-duty commercial use • Enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm • The trolley jack has a twin piston quick-lift feature • The integrated rubber saddle pad prevents damage to the underside of the vehicle • Rear-swivelling, hard-wearing nylon wheels give quiet, smooth operation and prevent damage to garage and workshop floorsThis low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to pre…

• Single nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Fitted with eye bolt for rope or chain.Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.• Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10tonne. • Model No. WC03Technical Sp…

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease.• Each dolly can hold up to 150kg of evenly spread weight.• Injection mould plastic features non-slip pads which prevent load from slipping.• The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use.• They also feature built-in carry handles to aid transportation and 75mm TPR double ball-bearing castors for manoeuvrability.• Overall Size (W x D x H): 605 x 400 x 120mm.Interlocking plastic dollies can be linked lengthways or sideways to allow the user to …

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• LOW ENTRY LIFTING RANGE - Minimum saddle height 85mm, maximum saddle height 385mm.• PROFILED LIFTING ARM - Allows low clearance height making this unit suitable for sports and custom cars.• ONE PIECE HYDRAULIC UNIT - Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.• WHITE SADDLE - Aids positioning under vehicle and safety valve prevents overloading.• HEAVY DUTY CHASSIS - Has strengthening flanges along the top edge for extra torsional rigidity under load.Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…