United Kingdom

Car Jacks

 prices on 874 models  
£500
clear
Save List
Show
• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…
from £107.95 up to £146.57 
Compare prices and buy Sealey Front Headstock Stand
£108.00
£147.00
Compare prices2
Note: Image is for illustrative purposes only and may differ from the actual product
£79.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci
from £157.95 up to £227.13 
Compare prices and buy Sealey Power Hoist 230V/1ph 250kg Capacity
£158.00
£158.00
£180.00
£209.00
£227.00
Compare prices5
Max Load 0.7 t
£10.69
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty
£124.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Strong – 4 castors ensure stability Stable – wide nylon wheels provide extreme safety Flexible – thanks to adjustment range of 335-595 mm Power – maximum load capacity of 567 kg Flexible – thanks to castors, the jack can be moved as required
£179.00
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Profiled lifting arm gives low clearance height of just 85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended.
from £229.99 up to £230.08 
Compare prices and buy Sealey Trolley Jack 2.5 Tonne Low Entry with Rocket Lift
£230.00
£230.00
Compare prices2
Note: Image is for illustrative purposes only and may differ from the actual product
£99.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £79.95
Compare prices and buy Sealey Lifting Strap 5m 5 Tonne LS5005
£80.00
£80.00
Compare prices2
This large and substantial B-G Racing Quick Lift Jacks is designed to lift Saloon cars such as Rally or Touring cars. Designed to provide a temporary lifting solution (lifting up to 210mm), the jack is simple to operate with a quick and reliable action and is ideal for quick services where simple wheel changes or general checks are to be carried out. A safety locking mechanism is featured and the handle end is coloured bright yellow for visibility. Available in a choice of silver/grey or red colours, both of which are powder coated for long term protection.Dimensions:Length: 1190mmWidth: 370mmClosed Height: 50mmOpen Height: 210mmReach: 980mmHandle Length: 1400mmWeight: 12.5kgLifting capacity: 4…
£283.79
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Manufactured from a heavy duty steel construction and a tough powder coated finish, the Clarke Strong Arm CTJ2500QLP Jack combines the benefits of a low profile and a quick lift trolley jack up to a maximum capacity of 2.5 tonnes (2,500kg). These features are very useful for rapid operation on low cars, making it ideal for motor sports, garages and mobile service operators. The CLARKE CTJ2500QLP is supplied with a lower handle tube, upper handle tube, 110mm dia. saddle pad and handle socket retaining clip. Our full range of Clarke Strong Arm Trolley Jacks are provided with a 1-year manufacturer's warranty.
£161.99
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Low profile car jack 2.5T 80-360 mm BEST 10663 ✅ Capacity: 2.5 tons | ✅Low profile: 80mm | ✅ Length: 540 mm I ✅ Height with lowered arm (measured from the plate): 8 cmI ✅ Flooded with hydraulic oil Rating of our customers⭐️⭐️⭐️⭐️⭐️ ⭐️ Features of the lift ✔️ The lift allows you to lift an object weighing up to 2500 kg. ✔️ Perfect for a home garage as well as a professional workshop. ✔️ Perfect for sports cars with low suspension due to the low profile. ✔️Height of the tool with the arm lowered (measured from the plate) is 8 cm ✔️ The lift has wheels, making it more comfortable to use. Rear fixed, front swivel bearings ✔️ The construction of the device is reinforced with brackets, which translate…
£177.03
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 23.8mm. Size ø108mm. Fits saddle ø106-108mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 23.8mm. • Size: ø108mm. • Fits saddle ø106-108mm. • Model No. JP10Technical Specification:Nett Weight: 0.16kgJack Pad Size: ø108mmStyle: Type CProfile Depth: 23.8mmTo Fit Saddle Size: ø106-108mmWeight: 0.16kgDimensions: Length: 15mm x Height: 190mmWeight: 0.172KgWarranty: Consumable
from £7.52 up to £8.95 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type C V3
£8.00
£8.00
£9.00
Compare prices3
Universal Engine & Gearbox SupportDesigned to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etcRemoves the need for using cranes, transmission jacks etcUniversal tool designed for all makes of vehicle - No need for costly model specific bracketsThe unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support armsFully adjustable in all dimensions:- Extension: Min 630mm / Max 960mm- Support Plate Adjustment: 190mmSpare Parts:38360000-01 - Support Pad & Adjustable Bar
£359.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO500MLSTechnical Specification:Nett Weight: 0.47kgPack Qty: 1Size: 500mlDimensions: Length: 60mm x Height: 213mmWeight: 0.472KgWarranty: Consumable
from £10.95 up to £14.99 
Compare prices and buy Sealey Hydraulic Jack Oil 500ml
£11.00
£11.00
£13.00
£13.00
£15.00
Compare prices5
Heyner Premium OEM scissor jack for Audi Q5 | Lift PRO is design to lift only limited type of vehicles – please see list below – that is why you can be sure it will fit perfectly Car Jack Lift Min. lifting height (mm) – 100mm, Max. lifting height (mm) – 385mm. Jack dimension without storage bag 490mm x 130mm x 130mm. Weight – 3.9 kg Min. lifting height (mm) – 100mm, Max. lifting height (mm) – 385mm. Jack dimension without storage bag 490mm x 130mm x 130mm. Weight – 3.9 kg OEM: 8R0 011 031 K BN3 Will fit: Audi Q5 2008-Onwards OEM Car Jack made by HEYNER Germany - leading German manufacturer of high-quality garage tools and car accessories
£99.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
• Low entry short chassis jack • Ideal for reduced clearance vehicles • Portable and compact design for easy storage • Steel chassis • Rear swivelling steel castors and extra large front wheels, with wheel covers • Safety valve prevents the jack from overloading • One piece handle and plastic carrying handle • Manufactured to EN1494 SpecificationLow entry, short chassis jack. Ideal for sports and custom vehicles with a reduced clearance height. The compact all-steel chassis and portable design enable easy storage. Rear swiveling steel castors increase maneuverability and aid positioning. Fitted with a safety valve, which prevents the jack from overloading. One-piece handle and plastic carry ha…
from £54.95 up to £66.36 
Compare prices and buy Draper Low Entry Trolley Jack (2 tonne)
£55.00
£60.00
£60.00
£66.00
Compare prices4
VEVOR Floor Jack, 2.5 Ton Low Profile Floor Jack, Aluminum And Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 95 mm-475 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingConvenient ArmrestsHandle Length: 45"/1145 mm,Product Size (L x W x H): 28x12.6x5.9(inch)/710x320x150(mm),Lift Weight Capacity: 5500 LBS/2.5 Tons,Model: QJD-LTD025A-00,Product Weight: 60.5 lb/27.45 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 18-7/10"/475 mm,Material: Aluminum + Steel,Tray Diameter: Φ4-7/10"/119 mm,Minimum Height: 3-3/4"/95 mm
£155.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height. Fitted with safety overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.12 Tonne Bottle Jack with Telescopic Ram• Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height.• Fitted with safety overload valve.• Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• 3 Year guarantee*.• Model No. PTBJ12SModel No: PTBJ12S:Brand:
£150.48
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Features & Benefits: • Min./Max. Working Height: 1225/1850mm. • Capacity: 4tonne per stand. • Steel stand. • Pin and chain load support. • Full width crutch. • Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle. • The…
from £427.95 up to £459.99 
Compare prices and buy Sealey High Level Supplementary Support Stand 4 Tonne ASH4000
£428.00
£428.00
£460.00
Compare prices3
Bottle jack, with hydraulic unit, max. load 15 t. Supplied = assembled. Max. load = 15 t. Lifting range with lifting head = 225 - 425 mm. Lift = 140 mm. Weight = 7.7 kg. Overall height from - to = 225 - 425 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.
£189.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year
from £43.95 up to £49.99 
Compare prices and buy Sealey Trailer Jack with Weld-On Swivel Mount 250mm Travel - 900kg Capacit
£44.00
£44.00
£47.00
£48.00
£50.00
Compare prices5
The JCB-TH22504 is a robust and durable hydraulic automotive trolley jack designed to offer a maximum lifting capacity of up to 2.25 tonne in weight.Constructed with a high quality and heavy-duty steel frame, the JCB TH22504 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 530mm in height.The JCB-TH22504’s extended height makes it suitable for lifting taller vehicles, while its extra long body design provides additional leverage and dependable stability when lifting.This JCB trolley jack is also equipped with swivel rear wheels and a saddle to provide smooth manoeuvring and positioning of the jack, while its integrated pr…
£89.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £32.95 up to £42.59 
Compare prices and buy Draper Wide Load Sling, 5m x 90mm, 3 Tonne
£33.00
£33.00
£43.00
Compare prices3
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height