Car Jacks

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 95/485mm, allowing low entry. • Chassis Length: 725mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. • Utilises many weight saving techniques such as skeletal lift arm…

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 6.4mm. Size ø106.5mm. Fits saddle ø99-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 6.4mm. • Size: ø106.5mm. • Fits saddle ø99-106mm. • Model No. JP02Technical Specification:Nett Weight: 0.06kgJack Pad Size: ø106.5mmStyle: Type BProfile Depth: 6.4mmTo Fit Saddle Size: ø99-106mmWeight: 0.06kgDimensions: Length: 10mm x Height: 190mmWeight: 0.07KgWarranty: Consumable

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Overall Size: ø630mm x 760mm.Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys. • Overall Size: ø630mm x 760mm. • Model No. STR.CTechnical Specification:Nett Weight: 0.00kgSize: ø630mm x 760mmDimensions: Length: 209mm x Height: 34mmWeight: 0.164KgWarranty: 1 year

• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO/5LTechnical Specification:Nett Weight: 16.91kgPack Qty: 4Size: 5LDimensions: Length: 280mm x Height: 298mmWeight: 16.906KgWarranty: Consumable

The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000kg.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm

• Durable 2.1kg rubber wheel chocks (1.05kg each).• Prevents car, caravan or light aircraft moving when jacking or parked on an incline.• Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for u…