Car Jacks

• Single nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Fitted with eye bolt for rope or chain.Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.• Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10tonne. • Model No. WC03Technical Sp…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 2 metre

• Suitable for supporting large multi-cylinder engines (maximum weight 75kg).• The supports can rotate for accessibility to all parts of the engine.• Width, height and length adjustable.• Capacity: 75kg.Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02Technical Specification:Capacity: 75kgEngine Support Span: 130-370mmHeight: M…

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…

• Durable 2.1kg rubber wheel chocks (1.05kg each).• Prevents car, caravan or light aircraft moving when jacking or parked on an incline.• Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for u…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – the two handles with rubberised ends ensure the pneumatic jack is always in the optimum position
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder provides added stability when exten…

Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackaging data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g

• Heavy-duty steel-plate with rust resistant finish.• Fitted with four ø75mm metal castors, two lockable.• Each dolly features a side handle for easy carrying.• Can handle up to 250mm profiles.• Suitable for use in bodyshops and workshops.Heavy-duty steel-plate with rust resistant finish. Fitted with four ø75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm profiles. Suitable for use in bodyshops and workshops.• Can handle up to 250mm profiles. • Fitted with four ø75mm metal castors, two lockable. • Heavy-duty steel-plate with rust resistant finish. • Each dolly features a side handle for easy carrying. • Suitable for us…