Car Jacks

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

B0165 Castors to Suit KEN 5037160K, Pack of 4 by Kennedy

HI JACK HEAVY DUTY BASE ASSEMBLY

The SJBEX200 features a two-stage mechanical safety lock and telescopic finger guard to prevent injury. This combined with a wide lift function that is fully certified and approved to VOSA requirements makes it ideal for lifting vehicles on a ramp. The beam has spring loaded flat arms with roller bearings and when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp and firmly stabilise the unit. Completing this jacking beam is a solid construction allowing it to be able to support up to 2 tonnes in weight.

4 Pc Octagon 135*10mm Heavy Duty Black Rubber Arm Pads Car lift Accessories Kit Description: Technical Specifications Type: Car lift accessories Material:Rubber Color: Black 4Pcs Octagon 135*10mm Shape: Octagon Thickness: 10mm(3/8") Length: 135mm(5.3") Features and Benefits This is a set of 4 HEAVY DUTY lift pads. These were found on many different brand lifts. These are very thick and very durable. They are able to hold up to sharp sub-frames and pinch weld lifting points. Notice 1. Please allow 1-2mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Included 4 x Rubber Arm Pads…

The Pitking Products quick lift "monkey" jack is designed to be carried on-board the rally car for use in a critical/emergency situation. The jack is lightweight and compact with a sturdy base which is produced from a high grip plastic/rubber suitable for all terrains giving the jack a solid stand point every time. 730mm maximum lifting height ideal for where extra height is neededLightweight and compact designIdeal to keep in a rally car for emergency repair useTo operate, the jack is positioned next to the vehicle at the jacking point, with the protruding leg on the platform used to raise the car. The jack has a ratchet mechanism to lift the vehicle and travels from the minimum point of

To suit the Kennedy Heavy Duty 1/2 Ton Transmission Jack (KEN-503-7160K) illustrated. N.B. Jack not included.

Fine rolled thread and precision made thrust bearing for long life and smooth operation.

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.2.5 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 95/485mm allowing low entry.• Chassis Length: 725mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. • Utilises many

0.2 kg

Replacement Trolley Jack Valve Release Knob by Kennedy

DescriptionWith a lifting capacity of up to 180 kg, the range of applications is virtually unlimited. The installation of doors, windows, and cabinets are obvious uses, but flooring and the construction of porches, decks, and frameworks are also perfect opportunities to use this ingenious tool. All this and much more can easily be done with controlled precision thanks to the unique construction of the handheld jack.Anti-decoupling design, prevent slippage by limiting the plate.Lifts all size drywall sheets.Made of stainless steel durable and long service life.Strong support, practical and sturdy. Suitable for Flooring, Window, Cabinet, HVAC, Deck InstallationKey SpecificationsHardened stainless …

L shaped Metal Adapter Bracket For Hydraulic Jack | Dedicsated open end L shape adapter for lifting caravans,motorhomes, camping vehicles Double Edge Adapter for Hydraulic Jacks Inner Diameter: 20/27 mm | Contact Area: 45 x 53 mm Lift Jack Adapter Made of high quality steel, will not damage the vehicle. The adapater fits most of the bottle jacks but please check the dimensions before buying/ This is a high-quality HEYNER product

Maximum Pressure - 30 T / 30.000 Kg Workbench Width - 460 Mm Piston Stroke 160Mm Operating Pressure (Under Full Load) - 666 Bar / 9.656 Psi