Car Jacks

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from more→durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are so more→fter than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 2 metre

• Manufactured from strong, durable powder coated steel.• Provides safe and easy ramp access for in-line and multi axle vehicles.• Suitable for loading/unloading motorbikes, quads, ride-on lawn mower more→and mini tractors from vans or trailers.• Features a chain and hook to help secure ramps while in use.• Folding design allows compact storage when not in use.• Folded Dimensions (L x W x H): 890 x 230 x 150mm.• Extended Dimensions (L x W x H): 2000 x 230 x 50mm.• Maximum load 250kg single ramp or 500kg per pair.Manufactured from strong, durable powder coated steel. Provides safe and easy ramp access for in-line and multi axle vehicles. Suitable for loading/unloading motorbikes, quads, ride-on lawnmow…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of lim more→ited clearance. High quality welded chain with safety latches on the load hooks.

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specificati more→on:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type C. Profile Depth 22.7mm. Size ø122.7mm. Fits saddle ø122-126mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 22.7mm. • Size: ø122.7mm. • Fits saddle ø122-126mm. • Model No. JP05Technical Specification:Nett Weight: 0.19kgJack Pad Size: ø122.7mmStyle: Type CProfile Depth: 22.7mmTo Fit Saddle Size: ø122-126mmWeight: 0.19kgDimensions: Length: 30mm x Height: 190mmWeight: 0.188KgWarranty: Consumable…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxe more→s and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Plea more→se note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year