Car Jacks

Chain Block 0.5tonne 2.5mtr Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited. Specifications Make: Sealey Model No.: CB500 Safe Working Load: 500kg Test Load: 750kg Standard Lift: 2.5mtr Load Chain Diameter: 6mm Pulling Effort: 23.5kgf Head Room: 295mm Overall Width: 127mm Overall Depth: 131mm Hook Aperture: 25mm Maximum Hook Capacity Ø: 35mm Weight: 10kg For Warranty see: Sealey Warranties Standard delivery: 2-3 days instructions

Chain Block 3tonne 3mtr Tested and certified to HSE specifications. Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited. Specifications Make: Sealey Model No.: CB3000 Safe Working Load: 3000kg Test Load: 3750kg Standard Lift: 3mtr Load Chain Diameter: 7.1mm Pulling Effort: 38kgf Head Room: 530mm Overall Width: 147mm Overall Depth: 179mm Hook Aperture: 47mm Maximum Hook Capacity Ø: 60mm Weight: 23.5kg For Warranty see: Sealey Warranties Standard delivery: …

Chain Block 2tonne 3mtr Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited. Specifications Make: Sealey Model No.: CB2000 Safe Working Load: 2000kg Test Load: 3000kg Standard Lift: 3mtr Load Chain Diameter: 8mm Pulling Effort: 36.7kgf Head Room: 470mm Overall Width: 187mm Overall Depth: 161mm Hook Aperture: 33mm Maximum Hook Capacity: 45mm Weight: 19kg For Warranty see: Sealey Warranties Standard delivery: 2-3 days instructions

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing. Features and Benefits • 3 Tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LR Specifications Model No CAR3000LR Brand: Sealey Capacity Pair: 3000kg Nett Weight: 0.00kg Overall Dimensions (L x W x H): 700 x 200 x 80mm Ramp Height: 65mm

Manufactured from durable polypropylene. Features and Benefits • 3 Tonne Capacity per pair. • Manufactured from durable polypropylene. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000C Specifications Model No CAR3000C Brand: Sealey Capacity Pair: 3000kg Maximum Tyre Width: 260mm Nett Weight: 0.00kg Overall Dimensions (L x W x H): 900 x 300 x 215mm Ramp Height: 160mm

Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No's CAR2000 and CAR2500.Model No:CAR2001Capacity (Each/per Pair):400/800kgLength:630mmMaximum Width:195mm

Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.Model No:CAR2000Capacity per Pair:2000kgLength:800mmRamp Height:190mmMaximum Height:250mmMaximum Width:345mmMaximum Tyre Width:200mm

Beam Clamp 3tonne Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Specifications Make: Sealey Model No.: BC3000 Capacity: 3000kg Adjustable Beam Width: 80-320mm A: 354mm B: 235-490mm C: 103mm D: 8mm E: 260mm F: 140mm G: 45mm H: Ø24mm Weight: 9.1kg Refer to catalogue for diagram. For Warranty see: Sealey Warranties

Beam Clamp 2tonne Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Specifications Make: Sealey Model No.: BC2000 Capacity: 2000kg Adjustable Beam Width: 75-220mm A: 260mm B: 180-360mm C: 74mm D: 6mm E: 215mm F: 102-155mm G: 25mm H: Ø22mm Weight: 4.95kg Refer to catalogue for diagram. For Warranty see: Sealey Warranties Standard delivery: 2-3 days

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg

Watch Safety Video High Level Commercial Vehicle Support Stand 5tonne Capacity Heavy-duty 5tonne high level support stand. Safely supports vehicles when wheel free operations are being carried out. Independently UK load tested. Sturdy welded steel construction for superior safety and strength. Three types of large interchangeable crutches for good load distribution. Supplied with captive pin load support. Fitted with retracting castors for easy maneuverability. Suitable for commercial and public service vehicles. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Specifications Make: Sealey Model No: ASC50 Capacity: 5tonne …

Heavy-duty 7tonne short axle stands. Sturdy welded steel construction for superior safety and strength, which helps prevent distortion and twisting. Large saddles for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension.Model No:AS7SCapacity Each:7tonneCapacity Pair:14tonneMinimum Height:246mmMaximum Height:355mm

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large saddles for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support.Model No:AS6Capacity Each:6tonneCapacity Pair:12tonneMinimum Height:370mmMaximum Height:575mm

A fully adjustable saddle with forward, backward and side to side tilt.Suitable for use with Models No. 1000TR. 1000ETJ. 1000TRQ. 1500TR Specifications Model No: ADT5 Compatibility: 1000TR Capacity: 1000kg For Warranty see: Sealey Warranties Standard delivery: 1-2 days Instructions Parts

A fully adjustable saddle with forward, backward and side to side tilt. Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg. Specifications Model No: ADT3 Compatibility: 300GA, 300TR, 300TRQ, 600GA, 600TR, 600TRQ, 1000GA, 1250GA, 1250GTA Capacity: 500kg For Warranty see: Sealey Warranties Standard delivery: 1-2 days Instructions

Transmission Jack Yankee 0.5tonne Vertical Telescopic Telescopic 2-stage model for reduced clearance lifts. Featuring high-speed lift to gearbox. Foot pedal operation keeps hands free for aligning saddle with transmission via saddle adjustment. Spring-loaded dead man's safety release control reduces the risk of inadvertent lowering. Highly manoeuvrable on castors. Specifications Make: Sealey Model No: 500TTJ Capacity: 500kg Ram Extensions: 2 Minimum Saddle Height: 890mm Maximum Saddle Height: 1875mm Base Size: 1000 x 1000mm Fixed/Adjustable Saddle: Adjustable Saddle Tilt - Forward: 28° Saddle Tilt - Backward: 22° Saddle Tilt - Side to Side: - Saddle Adjustment - Left/Right: 65mm …

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Features and Benefits • Manufactured from high quality translucent virgin HDPE plastic • Supplied with integral 360° swivelling tap and fitted with easy flow valve Contents 1 x Water Container with Tap, 25L

Trolley Jack Yankee 2ton High Lift Low Entry High lift jack arm with incredible low access height of just 80mm. Fitted with quick lift foot pedal and dead man's control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points. Fitted with one-piece hydraulic unit with built in safety overload protection. Specifications Make: Sealey Model No: 2200HL Capacity: 2ton Minimum Saddle Height: 80mm Maximum Saddle Height: 795mm Maximum Chassis Height: 220mm Length: 950mm Weight: 49kg For Warranty see: Sealey Warranties Standard delivery: 1-2 days Instructions

Equip your vehicle with the latest industry products! Buy Jack Dunlop 1500 kg and don't miss out on anything!. Max. supported weight: 1500 kg. Approx. dimensions: 10 x 6 x 42 cm