Power Saws

Features:- Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts- Made of bi-metal HSS containing 8% cobalt alloy for long-lasting cuttingSmooth Cutting:- Bi-metal Hole Saw offers smooth cutting through various materials- Made of bi-metal HSS containing 8% cobalt alloy for long-lasting cuttingSpecifications:- Diameter (D) mm: 108- Diameter inches: 4 1/4- Working length mm: 44Materials:- Softwood- Drywall- Metal pipes and profiles- Non-ferrous metals- Plastics

Bosch 2608594232 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 79mm The Bosch 2608594232 HSS-Bi-Metal Holesaw has a diameter of 79mm and a working length of 44mm. BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- BiM Progressor Hole Saw offers 2x longer lifetime than predecessor
- Redesigned with Bi-Metal …

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth 38mm

Irwin Holesaw Bi Metal High Speed Diameter: 117mm.

This Makita Ezychange Hole Saw is equipped with quick release pilot drill and core body. This not only allows speedy size changes but is also a safer method for the user. Manufactured from HSS Bi-Metal with 8% cobalt and progressive tooth geometry, ensures long service life and high cutting speeds suitable for ferrous and non ferrous metal, stainless steel, Aluminium, wood and plastics. Ezychange hole saws can be purchased individually or as a kit designed with the right sizes to suit your trade. Compatible with other major manufacturers quick change holesaws. Specifications • Diameter: 86mm • Working Length: 44mm Features & Benefits • Allows speedy size changes • Core body …

The RemGrit® Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip. It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws. Maximum Cutting Depth: 29mm.Disston G052 Remgrit Holesaw 83mmAdditional Information:• Size: 83mm• Material: Carbide Grit

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a 10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Bi-metal Fast Cut holesaws combine a brand new tooth material, boasting enhanced durability and a new tooth design that provides a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw. Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8"). Features and Benefits New tooth design, providing a smoother, faster cut on almost all materials Enhanced heat and wear resistance Specifically suited to cutting stainless and mild steel sheet Will also cut through tubes with a wall thickness of up to 3mm Notes Images for illustrative purposes only

Cutting Holes In Brick, Soft Tiles And Drywall Is Essential For Plumbers And Electricians On A Building Site Or During Renovation Work. Few Hole Saws Can Withstand This Kind Of Work In A Mixture Of Tough Construction Materials, But The Expert Construction Material Can. This One Hole Saw Serves, And Lasts, For Many Jobs.The Bosch Expert Construction Material Hole Saw Is A Robust Hole Saw That Is Very Useful On The Building Site And Offers Great Value To Professionals Because It Is So Long-Lasting.Features: - Long Life Cutting Holes In Brick And Particle Board- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- For Use With …

Cutting Holes In Brick, Soft Tiles And Drywall Is Essential For Plumbers And Electricians On A Building Site Or During Renovation Work. Few Hole Saws Can Withstand This Kind Of Work In A Mixture Of Tough Construction Materials, But The Expert Construction Material Can. This One Hole Saw Serves, And Lasts, For Many Jobs.The Bosch Expert Construction Material Hole Saw Is A Robust Hole Saw That Is Very Useful On The Building Site And Offers Great Value To Professionals Because It Is So Long-Lasting.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- Efficient Chip Extraction Through Large Slots.- Long Life Cutting …

Bosch Expert Sheet Metal Hole Saw For Long Life Cutting Holes In Stainless Steel: Cutting Holes In Sheets Of Steel Is Not Like Other Hole Saw Applications. In Industrial Settings, Or When Working On Vehicles, You Have To Be Extremely Precise – But At The Same Time The Material Is Hard And Destroys Traditional Bimetal Hole Saws. The Expert Sheet Metal Solves All These Issues In One Compact Piece Of High Quality Engineering. This Hole Saw Packs All The Best Qualities Into Its Short Stature: It Is Long Lasting, Accurate, And Optimised For Quality Sheet Metal Work.Features:- Long Life Cutting Holes In Stainless Steel- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Gr…

Corte exacto para radios interiores y exteriores
Cutting tool for sawing through wood, metal, or plastic
Available in various types including hand saws, circular saws, and jigsaws
Sharp teeth for efficient cutting

Combination shank for hand brace or power drill. Speed range 200 rpm when cutting holes above 90mm diameter increasing to 800rpm for 40mm diameter holes. The cutter has an easy to use adjustment nut, graduated beam and hardened pilot point. For wood and plastics, maximum cutting depth 30mm. Display packed.