Power Saws

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

It is suitable for use with angle grinders. The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-brazing technology ensures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds • Vacuum-brazing technology ensures long lifetime Specifications: Diameter (D) mm: 55 Diameter (D) Inch: 2 11/64 Working length (L1) mm: 35 Materials: Stone Materials …

The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. The Special for Sheet Metal Hole Saw features Bosch's unique power-change …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 146 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Suitable for use with cordless DUX18, DUX60 and UX01 and 4 stroke EX2650LH
Extension / telescopic chainsaw
Chain oil tank with high transparency
Integrated branch hook for convenience when removing cut branches from trees
300mm guide bar length weighing 2.0 kg
Dimensions 1207mm x 88mm x 102mm

Lenox SPEED SLOT® Hole Saws with T3 technology™ Features & Benefits• 50% Longer Life. 2X More Durable • 10% Thicker Wall adds strength and durability • Improved Metal Cutting Performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase design for fast, easy plug ejection

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-68-C Carded Size: 68mm.Additional Information:• Size: 68mm• Material: TCT

The LENOX DIAMOND Holesaw has a robust design for greater durability in tough applications. With a long-lasting brazed diamond edge that drills more holes in even the hardest ceramic and stone materials. Its thin kerf enables fast and easy cutting. Round holes in the side of the holesaw make removing plugs faster and easier. Uses a standard or SNAP-BACK Arbor. This LENOX DIAMOND Holesaw has the following specification Diameter 76mm Fits SNAP-BACK Arbor 2L, 6L Fits Standard Arbor 2L, 3L, 6L, 7L

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

The Lumberjack TS250SL is a very well made floor standing table saw with a powerful 1800 Watt motor and 10 Inch / 250mm blade. It is an essential piece of machinery for the woodworking workshop, and for most rip, cross, bevel & mitre cutting jobs. With left and right extension tables and a hard wheel rise and fall system, this quality saw also comes with a full length rip fence, push stick for safety and a fitted TCT blade. Features: Delivers clean straight, angled or mitre cuts with speed and precision Large main table with sturdy frame for complete stability The height and angle can be adjusted to perform mitre cuts including bevel edges as well as clean sizing jobs Two side extensions can …

Milwaukee's Hole Dozer Bi-Metal hole saw range is the perfect solution for cutting a variety of materials including Steel up to 1000 N/mm² strength, Stainless Steel and Acid-resistant Steel, Non-Ferrous Metals, Cast Iron, Aluminium, Wood, MDF, Gypsum Plasterboard, Sandwich Materials and PVC. This 10 piece set has been designed with electricians in mind and includes 6 hole saws along with 2 arbors, 2 pilot drills and a robust storage case. Type Matrix II premium high speed steel is used for the toothed area of these hole saws. Matrix II steel contains 8% cobalt, allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. …