Power Saws

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Diamond coated cutting edge permanently bonded to tough steel body provides necessary clearance for cutting at high speed. Rapidly cuts through reinforced plastic, germanium and other abrasive materials. Holesaw and Arbor sizes: 14-30mm - use Arbor XA1. 32-210mm - use Arbor XA2.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Features: - Diamond Coating Gives This Hole Saw Durability On Very Strong Tiles- Thin Cutting Edge Allows For Rapid, Clean Cuts In Hard Ceramic- For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.- Diamond For Hard Ceramics Hole Saw Cuts Through The Hardest Tiles- Unique Power-Change Adapter With The Fastest Arbour System For Locking/Unlocking Hole Saw And Pilot Drill In One ClickSpecification:Materials:- Hard Tiles- Soft Tiles- Hard Stone- Soft Stone- Diameter Mm: 51- Diameter Inches: 2- Working Length Mm: 39

Bi-metal Fast Cut holesaws combine a brand new tooth material, boasting enhanced durability and a new tooth design that provides a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw. Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8"). Features and Benefits New tooth design, providing a smoother, faster cut on almost all materials Enhanced heat and wear resistance Specifically suited to cutting stainless and mild steel sheet Will also cut through tubes with a wall thickness of up to 3mm Notes Images for illustrative purposes only

Mini saw attachment as precision circular saw for fine, straight cuts in wood and wood-like materials
Ideal for detailed cutting or sawing laminate and wooden flooring
Optimal safety thanks to the transparent blade guard
Cut in wooden material up to 6.4 mm deep
Compact size allows for cutting in small and hard-to-reach places