Car Jacks

This professional quality bottle jack has: Capacity (Tonnes): 5 Jack Height (Min-Max): 185-355mm Weight: 4.08kg tough cast iron base with screw in components High quality polished steel ram with additional screw in/out height adjuster Three piece pumping handle Automatic overload protection

VEVOR Hydraulic Bottle Jack, 20 Ton/44092 LBS All Welded Bottle Jack, 240-450 mm Lifting Range, with 3-section Long Handle, for Car, Pickup Truck, Truck, RV, Auto Repair, Industrial EngineeringSmall But PowerfulPremium MaterialEasy to OperateMaintenance MethodCompact and PortableWide ApplicationsItem Model Number: QJD-01-020A,Max. Capacity: 44092 lbs/20 Ton,Net Weight: 21.2 lb/9.6 kg,Lifting Range: 9.4-17.7 inch/240-450 mm,Product Size: 6.2×5.5×9.4 inch/157×140×240 mm

Made from heavy-duty moulded rubber for extra grip Suitable for use with cars, light commercial vehicles, caravans and trailers Fitted with eye bolt ring for use with rope or chain Draper lifetime warranty

Supplementary Article / Supplementary Info Info 2: with protective gloves, Removable key; Material: Steel; Weight [kg]: 2.33; Load capacity to [kg]: 2000; Certificate: CE; Jack type: Scissor jacks; Length [mm]: 435; Width [mm]: 90; Stroke [mm]: 390

VEVOR Hydraulic Long Ram Jack, 8 Tons/17363 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker with Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red8-Ton/17636 lbs Load Capacity26 "-45.7" Lifting RangeHydraulic Steel CylinderSingle Piston Pump & Clevis BaseHigh-grade Steel StructureResidential and Commercial UseStoke: 19.7 in/50 cm,Pinhole Diameter: 0.7 in/1.7 cm,Product Diameter: 3.1 in/8 cm,Piston Rod Diameter: 1.2 in/3 cm,Lifting Capacity: 8 Tons/17363 lbs,Model: VV-CGQJD-HODJ-8T,Min. Lift Height: 26 in/66 cm,Max. Lift Height: 45.7 in/116 cm,Power: Hydraulic,Weight: 20.5 lb/9.3 kg

Test Mark: CE; Weight [kg]: 3; Supplementary Article / Supplementary Info Info 2: with case; Lift drive type: Hydromechanical; Jack type: Single-telescopic; Drive-over height [mm]: 180; Load capacity [kg]: 4000; Lifting height (lift system) [mm]: 350; Support plate diameter [mm]: 26; Stroke (lift system) [mm]: 170; Number of telescopic stages: 2; Operating Mode: Hydraulic; Load-bearing Capacity [t]: 4; Jack type: Bottle jacks; Vehicle type: SUVs

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Fine rolled thread and precision made thrust bearing for long life and smooth operation.

Product line: GRE; Load-bearing Capacity [t]: 8; Weight [kg]: 4.8; Stroke [mm]: 190-365; Size: 103x118 mm.; Piston Height [mm]: 115; Thread Length [mm]: 60; Jack type: Bottle jacks; Colour: silver; Operating Mode: Hydraulic

Load-bearing Capacity [t]: 6; Lifting Height from [mm]: 197; Lifting Height, up to [mm]: 382; Operating Mode: Hydraulic; Total Length [mm]: 130; Height [mm]: 197; Width [mm]: 120; Jack type: Bottle jacks

Sturdy All-Steel Construction Quick-Fit Handle And Safety Overload Valve. Heavy Duty Hydraulic Bottle Jack Is Robust Stable And Safe With A Large Base And Easy Height-Adjustment Screw. Conforms To En1494:2000+A1:2008.PTDTST598558

Primarily designed for the tidy and convenient storage of trolley jacks. Tough polyester construction with rigid base. Five hook-and-loop pads on the base to prevent movement whilst stored in the boot of a car. Two internal and two external pockets. Supplied with foam padded shoulder strap.600mm Trolley Jack Bag• Primarily designed for the tidy and convenient storage of trolley jacks.• Tough polyester construction with rigid base.• Five hook-and-loop pads on the base to prevent movement whilst stored in the boot of a car.• Two internal and two external pockets.• Supplied with foam padded shoulder strap.• Size (W x D x H): 600 x 300 x 200mm.• Main pocket size (W x D): 590 x

Width [mm]: 85; Weight [g]: 2260; Height [mm]: 110; Stroke (lift system) [mm]: 330; Length [mm]: 420; Material: Steel; Load capacity [kg]: 1500; Payload to [kg]: 1500; Lifting Height from [mm]: 110; Lifting Height, up to [mm]: 330; Load-bearing Capacity [t]: 1,5; Operating Mode: Mechanical; Jack type: Scissor jacks; Vehicle type: Passenger cars