United Kingdom

Car Jacks

 prices on 1074 models  
Show
Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01
from £27.91 up to £27.95 
Compare prices and buy Sealey Rubber Wheel Chocks 1.8kg Pack of 2
£28.00
£28.00
£28.00
Compare prices3
Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90 rotating pump and telescopic pump handle. Service kit readily available.
£162.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £20.95 up to £27.12 
Compare prices and buy Draper Wide Load Sling, 3m x 90mm, 3 Tonne
£21.00
£21.00
£27.00
Compare prices3
Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.
£639.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Versatile lifting range low entry minimum saddle height 100mm maximum saddle height 535mm. Twin piston rocket lift brings the lifting arm straight into contact with the jacking point with minimal pumps. Heavy-duty castors and extra-large saddle design allows ease of positioning under the vehicle protective jack handle sleeve to help prevent accidental damage to car bodywork when pumping the handle. Heavy-duty chassis with strengthening flanges along the side for extra torsional rigidity under load. Fitted with safety overload and pump-through valve preventing the handle locking at maximum ram extension.3 Tonne Low Profile Trolley Jack with Rocket Lift• Versatile lifting range low
£223.84
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Bottle jack, with hydraulic unit, max. load 15 t, 2+ items. Supplied = assembled. Max. load = 15 t. Lifting range with lifting head = 225 - 425 mm. Lift = 140 mm. Weight = 7.7 kg. Overall height from - to = 225 - 425 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£179.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year
from £44.95 up to £60.70 
Compare prices and buy Sealey Paddock Stand Front Fork
£45.00
£61.00
Compare prices2
Replacement Rear Castor to Suit ZT1120453X (Sgl) by Kennedy
£17.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Low profile 3 tonnes Trolley Jack, with extended long reach handle, 85mm low entry height, and twin pump design for faster lifting. Min height: 85mm, max height: 500mm.Size: 690mm x 343mm x 149mm. Weight: 34kg. Conforms to EN1494:2000.
£239.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.
from £64.95 up to £83.82 
Compare prices and buy Draper Beam Clamp, 1 Tonne
£65.00
£65.00
£75.00
£84.00
Compare prices4
The Clarke CTJ10GLS Heavy Duty Trolley Jack benefits from an extra-long reach, large 148mm diameter saddle and 10 Tonne capacity for easy lifting and a secure hold.
£766.80
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Specifications:- Weight: 2,578kg- Ability: 1500kg- Application: Automotive- Plastic weight: 6g
from £22.49 up to £65.12 
Compare prices and buy Dunlop 99265 1500kg Golden 99625
£22.00
£29.00
£65.00
Compare prices3
Car Scissor Lift Jack For VW Transporter T5 and T6 | All models with a weight up to 3000kg | OEM Lift Jack Wind Up Tool OEM Scissor Jack FIts VW Transporter Jack Suitable for breakdown and emergency repairs T5 and T6 Van Scissor Lift Jack | Campervan breakdown emergency tool | Lifting Stand | Brand: HEYNER Germany EU Made Heavy Duty Car Jack Lift | The jack stand is made from quality steel Min. lifting height: 100mm | Max. lifting height : 390mm
£79.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
3 Bellows Hand Held Air Jack
£499.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Trolley Jack / Max Load 3 t / Hubhöhe 400 mm / 17.4 kg / Cushions
£89.95
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms.• Supplied with two short lengths of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two…
from £180.95 up to £217.86 
Compare prices and buy Sealey Engine Support Beam 500kg Capacity Double Support
£181.00
£181.00
£193.00
£200.00
£218.00
Compare prices5
The SIP 2.5 Ton Aluminium/Steel Low-Profile Trolley Jack uses a Quick-Lift system which raises saddle to the lifting point, safety bypass system to prevent overloading, and a large rubber pad. 2.5 Ton maximum weight capacity 95mm to 470mm lifting height range Extra low-profile design for lower cars Durable aluminium / steel construction Dual pump Quick-Lift system raises the saddle to the vehicle lifting point quickly Safety bypass system protects the jack from potential problems or overloading Extra large saddle with rubber pad 2-piece handle with rubber bumper Heavy-duty wheels and castors
£299.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.
from £220.95 up to £294.45 
Compare prices and buy Draper Chain Hoist/Chain Block, 5 Tonne
£221.00
£221.00
£264.00
£294.00
Compare prices4
The WINNTEC® from SIP 5 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usage via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 150mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty
£839.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability simple to operate lock/unlock valve for raising and lowering rubber contact pad to prevent chassis damage and extra wide wheels for safe stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets suitable for a wide range of wheel nuts meaning the CTJ2250LP is not only ideal for garage use it’s the perfect jack for quick wheel changes in emergency situations.
£55.62
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
GREY machine jack, max. load 4 t, 4+ items. Supplied = assembled. Max. load = 4 t. Lifting range with lifting head = 65 - 406 mm. Lift = 341 mm. Weight = 35 kg. Product type = hydraulic jacks. Sturdy steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.
£699.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg
from £25.95 up to £26.98 
Compare prices and buy Sealey Axle Stand Storage Rack 2 & 3 Tonne
£26.00
£27.00
Compare prices2
Note: Image is for illustrative purposes only and may differ from the actual product
£2,699.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height