Car Jacks

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – achieve an optimal position effortlessly thanks to the three-position adjustable handle and two wheels on the pneumatic car jack
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder p…

• All steel construction with bolted height adjustment.• Ideal for long term motorcycle storage.• Sold in pairs.Technical SpecificationNett Weight: 2.04kgCapacity: 100kgMinimum Height: 325mmMaximum Height: 395mmTechnical Specification:Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mmDimensions: Length: 110mm x Height: 330mmWeight: 2.4KgWarranty: 1 year

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360 adjustable rotating cross beam to enable a greater range of support options when in use.

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 6 metre

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Enables commercial sized wheels and tyres to be removed/installed on hub studs.• Fork Centres: 535mm.• Length: 1255mm.Enables commercial sized wheels and tyres to be removed/installed on hub studs.• For commercial sized wheel and tyre removal/installation. • Fork Centres: 535mm. • Length: 1255mm. • Model No. TH002Technical Specification:Capacity: 127kgNett Weight: 7.45kgWheel Diameter: Fork Centres; 535mmDimensions: Length: 620mm x Height: 60mmWeight: 7.93KgWarranty: 1 year

Quick lift off-road/trial bikes stand allowing the user to perform essential maintenance or services more easily. Simple foot lifting mechanism allows the bike to be swiftly raised. Rubber mat on the lifting platform prevents damage to underside of vehicle. Carton packed. Features: Simple foot lifting mechanism Rubber mat preventing damage to underside of vehicle Specifications: Dimensions: H:36.0 x W:32.5 x D:33.0 cm Colour: Blue And Black Guarantee:12 Months Material: Metal Model Number: 04995