Powerline Adapters

Cisco Aironet Power over Ethernet Injector Provides up to 30W, 90-Day Limited Liability Warranty (AIR-PWRINJ6=)

The Cisco Aironet Power Injector (AIR-PWRINJ5) increases wireless LAN deployment flexibility of Cisco Aironet Access Points by providing an alternative powering option to local power inline power-capable multiport switches and multiport power patch panels.

The single-port Cisco Aironet Power Injector provides 802.3af power and data signal sending both to the Cisco Aironet Access Point.

The power injectors provide up to 15.4 W over the unused wire pairs of a Category 5 or better Ethernet cable supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 1040 1140 1260 2600 and 3500 Series Access Points. While it can also support the Cisco Aironet Series 3600 Access Points …

Axis 5027-421 PoE adapter

- Reduced installation costs
- IEEE 802.3af compliance

Easier and faster installations

Power over Ethernet (PoE) offers an easy fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling.

No need for power outlets

With the use of Axis PoE products Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install.

Axis PoE midspans and PoE splitters

Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables …

Axis 5026-202 PoE adapter Gigabit Ethernet

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance a switch is normally used as a repeater or optical fiber may be used.

To overcome this distance limit network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable and forward the rest to the camera. Dependent on midspan and camera type the connection in total can be between 200-400 meters (656-1312 ft.).

Compatibility
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections …

Supply power and data to up to four remote Powered Devices (PDs) with this PoE/PoE+/PoE++ injectorThis 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps 2.5Gbps 1Gbps 100Mbps and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE PoE+ PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions (NA/JP EU UK and ANZ).Versatile PoE InjectorMultiport PoE Injector supports the IEEE 802.3af …

Digitus 4 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Inject 80 Watts of Power Into Your Internet of Things (IoT) or PoE Network!

Up to the task

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Injector provides up to 50 W on the first port and up to 30 W on the second port to support IoT applications such as lighting sensors and building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts. This Ultra PoE injector is an excellent solution for bringing power to these critical systems.

Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Injector help …

Digitus 2 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Digitus 1 Port zu 2 Port Fast Ethernet PoE+ Repeater, 802.3 af/at

LevelOne 1-Port RJ-45 Gigabit PoE Repeater

Deliver power and data to your Power over Ethernet device using this mountable PoE+ midspanThis Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable at distances of up to 100 m (330 ft.).The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.Convenience and cost savingsThis versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power so you can easily power and access a high-power …

Digitus 10 Gigabit Ethernet PoE+ Injector, 802.3at, 30 W

Axis 02315-001 PoE adapter Gigabit Ethernet 1000 V

AXIS 90 W Midspan AC/DC is for installations where mains power is not an option. With a power input of either 24 V AC or 20-26.4 V DC it can deliver up to IEEE 802.3bt (90 W) to the network device. 24 V AC can be needed in harsh environments where new cabling or installations are not an option and you need to retrofit box dome or PTZ cameras. 20-26.4 V DC can be used where battery back-up is needed or for solar-powered installations. Or when the network device is built in another equipment and is powered directly from it.

AXIS 30 W Midspan AC/DCN/AN/AAXIS 30 W Midspan AC/DC is ideal for installations where mains power is not an option. With a power input of either 10-28 V DC or 24 V AC it can deliver up to IEEE 802.3at (30 W) to your network device. AXIS 30 W Midspan AC/DC is plug-and-play and compatible with all Axis PoE devices which require up to 30 W power. 24 V AC can be needed in harsh environments where new cabling or installations are not possible and you need to retrofit box dome or PTZ cameras. 10-28 V DC can be used where battery back-up is needed or for solar-powered installations. Or when the network device is built in another equipment and is powered directly from it for example in an ATM.

AXIS T8144 60 W Industrial Midspan is an industrial grade 1-port midspan offering an easy fast and cost-effective solution for powering network products. With a wide operating temperature from -40 C to 75 C (-40 F to 167 F) AXIS T8144 is robust in harsh environments. A typical configuration would be to enable PoE to a non-PoE based system (switch 3G/4G router or wi-fi access point) creating a compact and effective solution.

AXIS T8144 is ideal for mounting in cabinets or on DIN rail has dual DC inputs for power redundancy and supports all PoE devices.

Axis 01148-001 PoE adapter