Car Jacks

Replacement hydraulic ram for SSC900 engine crane. Features & Benefits: • Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08 Specifications: Model No SSC900.08 Brand: Sealey Nett Weight: 17.5kg Ram Capacity: 3000kg Ram Diameter: 27.85mm Ram Travel: 515mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.5mm Clevis Pin Hole Diameter: 16.5mm Mounting Point Distance (Min.): 634mm Overall Length (Min.): 670mm Base Mount Type: Double Clevis

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 2m x 120mm, 4 Tonne

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two short lengths of chain. Features & Benefits: • 500kg Capacity. • Min./Max. Width: 585/1580mm. • Designed to support and accurately position engines during maintenance operations. • Ideal for supporting the engine whilst replacing anti-vibration mountings and certain body panels. • Aids with the removal of gearboxes and transmissions. • Supplied with two short length…

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 3 Tonne Specifications: Depth (Beam Clamp): 103mm Girder Beam Width: 80-354mm Overall Width (Beam Clamp): 235-490mm Safe Working Load (SWL): 3 tonne Steel Plate Thickness: 8mm

Tyre storage/transport dolly ideal for use with up to eight tyres. Four Ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. The dolly has a capacity of 136kg. Features & Benefits: • Tyre storage/transport dolly ideal for use with up to eight tyres. • Four Ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. • Overall Size (W x D x H): 640 x 640 x 110mm. • Maximum Weight Capacity: 136kg. • Model No. STR006 Specifications: Model No STR006 Brand: Sealey Maximum Weight Capacity: 136kg Nett Weight: 3.28kg Overall Size (W x D x H): 640 x 640 x 110mm Wheel Capacity: 8

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top-up a hydraulic unit. Features & Benefits: • Suitable for hydraulic trolley and bottle jacks. • Recommended for all Sealey and other makes of hydraulic equipment requiring hydraulic fluid meeting ISO32. • Eliminates sponginess and slow system response. • Fully inhibited with low pour point for ease of use even in the coldest weather. • Model No. HJO5LS Specifications: Model No HJO5LS Brand: Sealey Nett Weight: 4.17kg Pack Qty: 1 Size: 5L

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.7mm. Size Ø91.5mm. Fits saddle Ø90-95mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: Ø91.5mm. • Fits saddle Ø90-95mm. • Model No. JP12 Specifications: Model No JP12 Brand: Sealey Nett Weight: 0.055kg Jack Pad Size: Ø91.5mm Style: Type B Profile Depth: 7.7mm To Fit Saddle Size: Ø90-95mm Weight: 0.055kg