Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size ø137.5mm. Fits saddle ø116-123mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø137.5mm. • Fits saddle ø116-123mm. • Model No. JP06Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø137.5mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø116-123mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.284KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Lifts and stabilizes any dual swing arm motorbike quickly and easily.• Fitted with width and angle adjustable rubber support pads.• Rubber supports mounted on heavy-duty box section for continuous professional use.• Bobbin Supports available as an optional extra - Model No. RPS1BS.• Delivered in knock-down form to reduce freight costs, some self-assembly required.• Min./Max. Width: 220-350mm.Technical SpecificationNett Weight: 4.3kgMinimum/Maximum Width: 220-350mmTechnical Specification:Minimum Width: 220mm Maximum Width: 350mmDimensions: Length: 110mm x Height: 470mmWeight: 4.8KgWarranty: 1 year

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Piston diameter = 23 mm. Base plate length = 95 mm. Base plate width = 93 mm. Additional height when unwound = 50 mm. Overall height from - to = 158 - 298 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 6.5mm. Size ø94mm. Fits saddle ø93-96mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 6.5mm. • Size: ø94mm. • Fits saddle ø93-96mm. • Model No. JP17Technical Specification:Nett Weight: 0.050kgJack Pad Size: ø94mmStyle: Type BProfile Depth: 6.5mmTo Fit Saddle Size: ø93-96mmWeight: 0.050kgDimensions: Length: 20mm x Height: 165mmWeight: 0.052KgWarranty: Consumable

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

• Replacement hydraulic ram for SC10LR.V3 engine crane.Technical SpecificationNett Weight: 11kgRam Capacity: 7257kgRam Diameter: 30mmRam Travel: 480mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min): 650mmOverall Length (Min): 665mmBase mount Type: Double ClevisTechnical Specification:Capacity: 7257kg Diameter: 30mmDimensions: Length: 710mm x Height: 150mmWeight: 9.99KgWarranty: 1 year

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.