Car Jacks

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 2 T more→onneHydraulic Lift: 100mmMaximum Height: 316mmMinimum Height: 168mmNett Weight: 2.2kgScrew Extension: 48mmTechnical Specification:Capacity: 2 Tonne Hydraulic Lift: 100mm Maximum Height: 316mmDimensions: Length: 105mm x Height: 185mmWeight: 2.4KgWarranty: 3 years

• Heavy-duty 7 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superio more→r safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …

• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop.• Sliding castor brackets adjust for width and rubber-faced support pads ad more→just for height.• Fitted with four ø150mm nylon castors.• Max. Width: 1485mm.• Min./Max. Height: 300/390mm.Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubb…

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). A more→ll duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 3 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Des more→ign Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with Model No's. 500TTJ and 800TTJ.Fully adjustable saddle with forward, backward and side-to-side tilt. Sui more→table for use with Model No's. 500TTJ and 800TTJ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's. 1000ETJ, 1000TR, 1000TRQ, 1500TR. • Model No. ADT5Technical Specification:Capacity: 1000kgCompatibility: 500TTJ and 800TTJ.Nett Weight: 23.69kgDimensions: Length: 315mm x Height: 350mmWeight: 24.6KgWarranty: 1 year

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one e more→nd (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

The Sealey MES03 Engine Rebuild Stand for supporting large multi-cylinder engines The Sealey MES03 is a Multi-Cylinder Engine Rebuild Stand, suitable for supporting large multi-cylinder engines (maxim more→um weight 100kg). The supports can rotate for accessibility to all parts of the engine. Both the width and length are adjustable. The engine stand's frame elongates to allow adjustment for length between mounting points. Features:   
- Width and length adjustable
- The supports can rotate for accessibility to all parts of the engine
- Suitable for supporting large multi-cylinder engines (maximum weight 100kg)
- Engine stand's frame elongates to allow adjustment for length between mounting poi…