Car Jacks

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting.Technical SpecificationApplication(s): TTRS MK2 8J (2009-2014), PF3-1660, TT MK2 8J (2007-2014), R8 (2006 - ON), S7 (2012 - 2017), RS7 (2013 - 2017), A7 Quattro (2010 - 2017), A7 (2010 - 2017), A6 / S6/ RS6 C6 (2004-2011), S6 (2012 - 2018), RS6 (2012 - 2018), A6 Quattro (2011 - 2018), A6 (2011 - 2018), Jack Pads, SQ5 (2013 - 2017), Q5 Quattro (2008-2017), Q5 (2008-2017), S5 (2007 - 2016), RS5 (2010 - 2016), A5 Quattro (2007-2016), A5 (2…

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.• Min./Max. Height: 145/360mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety ov…

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – achieve an optimal position effortlessly thanks to the three-position adjustable handle and two wheels on the pneumatic car jack
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder p…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth of 19mm. Size ø148mm. Fits saddle ø128-131mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø148mm. • Fits saddle ø128-131mm. • Model No. JP04Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø148mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø128-131mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.3KgWarranty: Consumable

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

Twin-piston, quick lift facility - just five pumps to reach maximum height
Lifting range 88-358mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutch for even load distribution. Heavy gauge steel frame and base plate with welded construction gives superior strength and safety. Supplied with captive, multi-position pin load support. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 332/485mm. • Capacity: 40 Tonne per pair. • Heavy-duty high lift axle stands. • Sturdy welded steel construction. • Captive pin load support. • Ideal for use with 20tonne air jacks. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS20 Specifications: Model No AS20 Brand: Premier Capacity Each: 20 Tonne Capacity Pair: 40 Tonne Maximum Working Height: 485mm Mini…

• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop.• Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Fitted with four ø150mm nylon castors.• Max. Width: 1485mm.• Min./Max. Height: 300/390mm.Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubb…

Expert Quality, portable and compact twin stage pneumatic jack, capable of lifting 30 Tonnes. The ergonomic handle is fixed with a "Slow Down" valve and a "Self-Return" switch for increased safety and easy use. Fitted with industrial quality seals prolonging the life of the jack, a safety overload valve and twin rubber coated wheels for a quieter and smoother operation, whilst also preventing damage to garage floors and improving manoeuvrability. Supplied with 45mm and 75mm height lift extensions and a 1/4" BSP airline connector. Manufactured, tested and certified to the current EN1494 standard.