Car Jacks

Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included. Features & Benefits: • Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 400kg. • The support bar is not included. • Model No. PH400 Specifications: Model No PH400 Brand: Sealey Capacity (Double Cable): 400kg Capacity (Single Cable): 200kg Current: 3.3A Group of Mechanisms: M1 Insulating Grade: B IP Rating: IP54 Lift Height (Double Cabl…

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 3 Tonne Specifications: Depth (Beam Clamp): 103mm Girder Beam Width: 80-354mm Overall Width (Beam Clamp): 235-490mm Safe Working Load (SWL): 3 tonne Steel Plate Thickness: 8mm

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.7mm. Size Ø91.5mm. Fits saddle Ø90-95mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: Ø91.5mm. • Fits saddle Ø90-95mm. • Model No. JP12 Specifications: Model No JP12 Brand: Sealey Nett Weight: 0.055kg Jack Pad Size: Ø91.5mm Style: Type B Profile Depth: 7.7mm To Fit Saddle Size: Ø90-95mm Weight: 0.055kg

Solvent based Bitumen Paint, full bodied black brushable compound with added fibres for reinforcement. Specifically designed for overcoating leaking roofs but can also be used to bond felt. Dries to a tough black coating. Features and Benefits Specifically designed for waterproofing in roofing applications Easily applied by brush Once dried creates a tough weatherproof coating Fibre reinforced, can be used in felt bonding applications Available in 5ltr and 25ltr tins Typical Applications Roofing Waterproofing Building

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.Additional Information:Safe Working Load: 1500kgTest Load: 2250kgLift Height: 1.5mHook Aperture: 36mmHoist Weight: 11kg

Fully adjustable Subframe/Engine Support Adaptor is supplied with various types of fittings to suit different applications. Designed to assist in the removal and fitting of complete engine assemblies, rear axles, gearboxes, fuel tanks, exhaust systems and other awkward loads. The adaptor can easily be fitted directly onto the Sealey 500TTJ and 800TTJ Transmission Jacks, making it possible for a difficult two or three person job, to be carried out by just one person. Features & Benefits: • Fully adjustable Subframe/Engine Support Adaptor. • Supplied with various types of fittings to suit different applications. • To assist in the removal and fitting of complete engine assemblies, rear axles,…

Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 90/455mm. • Chassis Length: 682mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. • Utilises many weight saving techniques such as skeletal lift arm. • Features R…

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Fitted with carrying handle. Features & Benefits: • Min./Max. Height: 235/445mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Fitted with carrying handle. • Model No. SJ20 Specifications: Model No SJ20 Brand: Sealey Capacity: 20 Tonne Hydraulic Lift: 150mm Maximum Height: 445mm Minimum Height: 235mm Nett Weight: 8.60kg Screw Extension: 60mm