Car Jacks

The B-G Racing Formula Small Quick Lift Jack is suitable for single seaters and formula models which have ultra low entries in order to lift them. These latest versions now feature a safety lock for the handle.The Quick lifts are designed, as the name suggests, to slip easily underneath the application and lift to a fixed height with one easy action. These jacks are constructed from mild steel and are finished to a great quality look and feel, with a quality action and durability. The Quick lift jacks are power coated in a shade of silver/grey for durability and corrosion resistance. The ends of the hande are finished in yellow for ease of visibilityTwo sizes are available:Short Length: 790mm Width: …

Professional quality bottle jack with a telescopic two stage hydraulic ram and screw extension provides a much greater maximum while maintaining a low minimum height level.

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The TÜV and GS tested HEYNER 347090 Ultra Lift XS Pro is a high-quality ratchet scissor jack - suitable for small cars, small trailers and small cars with a total weight of up to 1.3 tonnes Side skirts height from the car: min. 25 cm | 100% lifting force: 230 - 323 mm | weight: 1.6 kg | material: powder-coated steel Q235 | trolley jack with 17 ratchet (adjustable direction) for comfortable lifting and lowering without clamping your hand Please note: the entire lifting force is reached in a range between 230 and 323 mm. Lifting work under 230 mm creates increased forces on the ball bearing. Lifting is not recommended for safety reasons. ✔️ Regardless of the workshop, simply lift the car to ch…

High lift jack arm ideal when lifting a light commercial vehicle. Fitted with quick lift foot pedal. Heavy-duty long steel chassis provides easy access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne Long Reach High Lift Commercial Trolley Jack• Min./Max. Saddle Height: 140/800mm.• High lift jack arm ideal when lifting a light commercial vehicle.• Fitted with quick lift foot pedal.• Heavy-duty long steel chassis provides easy access to deep set jacking points.• Fitted with one-piece hydraulic unit with built-in safety overload protection.• Model No. 2201HLModel No: 2201HL:Brand: Sealey:Capacity: 2000kg:Consumable

Stands lifting range of 10.75 inch to 16.75 inch Heavy duty jack saddle 360 degree swivel casters Jack has rotating 360 degree jack handle Trolley jack lifting range of 5.25 inch to 13 inch

This 30 Tonne Manual/Air Hydraulic Bottle Jack benefits from an all steel, one piece base, reservoir and pump cylinder which is designed to give added strength. Fitted with safety overload valve and manufactured in the EU.

Screw Jack 3200kg Non Sparking Al-Bron by EGA Master

Low profile 3 tonnes Trolley Jack, with extended long reach handle, 85mm low entry height, and twin pump design for faster lifting. Min height: 85mm, max height: 500mm.Size: 690mm x 343mm x 149mm. Weight: 34kg. Conforms to EN1494:2000.

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Quick Lift Pump, Floor Jack Lifting Range 130 mm-508 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingTwo-section HandleHandle Length: 45 in/1145 mm,Product Size (L x W x H): 25.8x12.8x6.7 (inch)/656x325x170 (mm),Lift Weight Capacity: 6600 LBS/3 Tons,Model: S508,Product Weight: 32.3 kg/71.2 lb,Load Bearing Method: Hydraulic Single Pump,Maximum Height: 20"/508 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 5.12"/130 mm

The Sip 2.5 Ton Aluminium/Steel Low-Profile Trolley Jack Uses A Quick-Lift System That Raises The Saddle To The Lift Point And Safety Bypass System To Prevent Overloading Plus Xl Saddle And Pad. • 2.5 Ton Maximum Weight Capacity • 95Mm To 470Mm Lifting Height Range • Extra Low-Profile Design For Lower Cars • Durable Aluminium / Steel Construction • Dual Pump Quick-Lift System Raises The Saddle To The Vehicle Lifting Point Quickly • Safety Bypass System Protects The Jack From Potential Problems Or Overloading • Extra-Large Saddle With Rubber Pad • 2-Piece Handle With Rubber Bumper • Heavy-Duty Wheels And CastorsPTDSIP03623