Car Jacks

• All steel construction with a 450kg capacity.• 12V Electro/Hydraulic lifting system for simple, fast operation.• Can be powered by a 12V vehicle battery or a Roadstart® unit.• Suitable for use in a garage or shed without the need of mains 230V electricity supply or for a mobile mechanic or race pits.• Support platform fitted with full width loading ramp.• Supplied with motorcycle front wheel locking attachment for tyre widths up to 135mm to assist in securing the vehicle.• Fitted with multi-position safety lock to prevent accidental lowering.• Suitable for use with centre or side stand motorcycles or with a rear paddock stand.Technical SpecificationNett Weight: 160kgCapacity: 450kgMinimum/Maxi…

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle and fitted with carrying handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle and fitted with carrying handle.• Min./Max. Height: 180/385mm. • Telescopic hydraulic ram allows a reduced closed height. • Carrying handl…

• Min./Max. Height: 220/760mm.• Working Platform Size (W x L): 480 x 1350mm.• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 500, 640 and 760mm to prevent accidental lowering.• Suitable only for smaller to medium capacity motorcycles with a centre-stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.All steel construction with foot operated, integral hydraulic pump and ram ass…

Bottle jack, with hydraulic unit, max. load 8 t. Supplied = assembled. Max. load = 8 t. Lifting range with lifting head = 200 - 385 mm. Lift = 125 mm. Weight = 5 kg. Piston diameter = 38 mm. Base plate length = 110 mm. Base plate width = 118 mm. Additional height when unwound = 60 mm. Overall height from - to = 200 - 385 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 6 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 6.4mm. Size ø106.5mm. Fits saddle ø99-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 6.4mm. • Size: ø106.5mm. • Fits saddle ø99-106mm. • Model No. JP02Technical Specification:Nett Weight: 0.06kgJack Pad Size: ø106.5mmStyle: Type BProfile Depth: 6.4mmTo Fit Saddle Size: ø99-106mmWeight: 0.06kgDimensions: Length: 10mm x Height: 190mmWeight: 0.07KgWarranty: Consumable

• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Fully certified and approved to comply with MOT req…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

The Sealey VMD002 Vehicle Moving Dolly enables easy movement around workshop or bodyshop The Sealey VMD002 is a 4 Post Vehicle Moving Dolly with a heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. The adjustable frame allows you to change the length and width as required. Features:
- Fitted with four 200mm nylon locking castors
- Enables easy movement around workshop or bodyshop
- Adjustable frame allows you to change the length and width as required
- Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles Specification: 
- Capacity: 900kg 
- Model No: VMD002 
- Minimum Width: 680mm 
- Minimum Heig…

• 1tonne Model manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.• 2-Way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.• Extra-large castors allow for increased manoeuvrability.• Hydraulic unit larger than the economy models for improved performance and durability.• Can be fitted with Model No. ADT5 - Adjustable Gearbox Support.Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications. Spring loaded dead man's safety release cont…