Car Jacks

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90 rotating pump and telescopic pump handle. Service kit readily available.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.2 Tonne Low Profile Short Chassis Trolley Jack• Min./Max. Saddle Height: 85/385mm allowing low entry.• Chassis Length: 563mm.• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.• Profiled lifting arm allows

Trolley Jack / Max Load 3 t / Hubhöhe 330 mm / Cushions

Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built-in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.

Rubber support universal for trestles with a support width of 29.5 mm Suitable for the trestle saddle, easy to mount High quality rubber Suitable for article 347470 HEYNER Stand Jack 6 Ton. Stand Jack isn't included!!! Brand: HEYNER Germany

Spacious - with total dimensions of 60 x 90 x 202 cm. Two shelves. A storage grille and pull-out storage rails with tension straps Load capacity - supports a total load up to 220 kg Mobile – thanks to four PU steering wheels with two brakes and modular construction Efficient - creates more order and saves paths in any body workshop

The Sip 2.5 Ton Aluminium/Steel Low-Profile Trolley Jack Uses A Quick-Lift System That Raises The Saddle To The Lift Point And Safety Bypass System To Prevent Overloading Plus Xl Saddle And Pad. • 2.5 Ton Maximum Weight Capacity • 95Mm To 470Mm Lifting Height Range • Extra Low-Profile Design For Lower Cars • Durable Aluminium / Steel Construction • Dual Pump Quick-Lift System Raises The Saddle To The Vehicle Lifting Point Quickly • Safety Bypass System Protects The Jack From Potential Problems Or Overloading • Extra-Large Saddle With Rubber Pad • 2-Piece Handle With Rubber Bumper • Heavy-Duty Wheels And CastorsPTDSIP03623

Lifter, without a hydraulic unit, type V5, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 252 - 392 mm. Lifting range with lifting toe = 15 - 165 mm. Lift = 140 mm. Max. load with lifting head = 5 t. Max. load with lifting toe = 5 t. Weight = 17 kg. Product type = hydraulic jacks. Can also be used where space is tight due to the compact design. High quality, compact steel construction. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations, in the workshop or for outdoor use - the high quality materials mean this lifting device can be used …

Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 - 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Seal Repair Kit for ZT1120454X by Kennedy

Air/Hydraulic bottle jack capable of both air assisted or manual operation. Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90° rotating pump and telescopic pump handle and has moulded carry handles incorporating storage for the pump handle. Service kit readily available.

All steel construction compact heavy duty unit with lifting range of 150mm to 410mm. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Suitable for larger cars, light vans and 4x4's. Product size: 630 x 280 x 170mm, weight 19.6 kg, packed in colour box.

Features: *100% brand new and high quality *Made of high quality material, durable and practical to use * Labor-saving jack handle,simple design easy to use. *Long lasting and durable construction,rust resistant. * Perfect for travel use and emergency wheel / tyre changes. *Material: High Carbon Steel *Size: 34cm Package Included: 1 x Car Jack Wrench Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

The B-G Racing Formula Small Quick Lift Jack is suitable for single seaters and formula models which have ultra low entries in order to lift them. These latest versions now feature a safety lock for the handle.The Quick lifts are designed, as the name suggests, to slip easily underneath the application and lift to a fixed height with one easy action. These jacks are constructed from mild steel and are finished to a great quality look and feel, with a quality action and durability. The Quick lift jacks are power coated in a shade of silver/grey for durability and corrosion resistance. The ends of the hande are finished in yellow for ease of visibilityTwo sizes are available:Short Length: 790mm Width: …