Car Jacks

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Everbuild Black Jack 902 Bitumen & Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints and roof coatings. Also suitable as a primer prior to applying Black Jack Flashing Tape.

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.

• All steel construction with bolted height adjustment.• Ideal for long term motorcycle storage.• Sold in pairs.Technical SpecificationNett Weight: 2.04kgCapacity: 100kgMinimum Height: 325mmMaximum Height: 395mmTechnical Specification:Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mmDimensions: Length: 110mm x Height: 330mmWeight: 2.4KgWarranty: 1 year

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Bottle jack, with hydraulic unit, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Piston diameter = 27 mm. Base plate length = 105 mm. Base plate width = 100 mm. Additional height when unwound = 60 mm. Overall height from - to = 195 - 380 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 90/455mm. • Chassis Length: 682mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. • Utilises many weight saving techniques such as skeletal lift arm. • Features R…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø86mm. Fits saddle ø83-88mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø86mm. • Fits saddle ø83-88mm. • Model No. JP11Technical Specification:Nett Weight: 0.045kgJack Pad Size: ø86mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø83-88mmWeight: 0.045kgDimensions: Length: 10mm x Height: 190mmWeight: 0.05KgWarranty: Consumable

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…