Car Jacks

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Heavy-duty, industrial quality, dual purpose toe lift bottle jack. Has a lifting capacity of 10tonne on the toe of the jack and 14tonne on the head. Designed to lift heavy plant or machinery where there is limited ground clearance such as fork lift trucks, machine installation or for use on construction sites. Fitted with a 280 rotating handle to enable jacking in confined spaces.

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

Bottle jack, with hydraulic unit, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Overall height from - to = 195 - 380 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Replacement Rear Castor to Suit ZT1120454X (Sgl) by Kennedy

This professional quality bottle jack has: Capacity (Tonnes): 5 Jack Height (Min-Max): 185-355mm Weight: 4.08kg tough cast iron base with screw in components High quality polished steel ram with additional screw in/out height adjuster Three piece pumping handle Automatic overload protection

The Clarke CTJ1500QULP combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars making it ideal for motor sports and mobile operators.

Protective Rubber Pad for trolley jack 1pcs designed for BMW models Jack Pad Size: 71 x 25mm Made of high quality rubber, will not damage the vehicle. Intended for BMW | Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

0.2 kg

The SIP 12 Ton Bottle Jack is compact and powerful, and features a built-in safety valve, screw extension for adjustable lifting heights, and a serrated saddle to give secure load contact. 12 Ton maximum weight capacity 210mm to 415mm lift height range 60mm screw extension is included Serrated saddle for secure contact Durable and powerful construction Compact and very lightweight Reliable overload protections Heavy-duty cast iron base Integrated safety valve

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

This durable 3 Tonne jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.- Lifting Capacity: 3 Tonnes- Extra strong long 2 piece handle- Saddle height: Min 136mm. Max 465mm- Dimensions (LWH): 572 x 328 x 175mm- Weight: 28.3PTDCLA7623032