Effects Pedals

Love your FX 300? Then keep it safe with the LD Systems Padded Bag. From transport to breakdown your effects pedal is fully protected against knocks scratches and scrapes. Thats great news for touring artists who are always on the move. Bad weather? No problem. The Padded Bag for FX 300 keeps your equipment dry with a water-resistant nylon exterior. That means no nasty surprises getting in the way of your show. Space for your accessories and more. Carry all your gear with ease thanks to a large accessory pocket. Whether youre setting up or packing down carrying is easy with an ergonomic handle and shoulder strap. Live sound has never been this pain free.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Type: Dust Cover
Compatible with: Boss 500 Series
Made in: United Kingdom

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Type: Tremolo
Battery Operation: Yes
Power Supply: Adapter
Made in: China
UK/EU Power supply included: No

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

The Pedaltrain Triple Pedal Booster allows you to customise your board to your needs by elevating up to three pedals by one inch to a more comfortable reachable and easy to use height.

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Made in: China
Type: Chorus
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Current (mA): 1300.0
Voltage: 9V
Plug Type: Barrel
Made in: China
Polarity: Center Minus
Type: Power Supply

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Type: Distortion;Overdrive
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Variant: Large
Made in: Vietnam
Material: Aluminium
Size: L
Colour: Black

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Voltage: 9V
Current: 1700 mA
Current (mA): 1700.0
Power Supply: 9V;Adapter
Polarity: Center Minus
Plug Type: Barrel
Made in: China
Colour: Black
Type: Adapter
Variant: 1 SPOT
ChargerType: Power Supply
Connector Angle: Straight…

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Current (mA): 500.0
Power Supply: 240V
Made in: China
Current: 201-500 mA
ChargerType: Power Supply
Polarity: Center Minus
Voltage: 9V
Plug Type: Barrel
UK/EU Power supply included: No
Number of Outputs: 1

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Compatible with: Headrush Mx5
Type: Dust Cover

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Power Supply: 240V
UK/EU Power supply included: No
ChargerType: Power Supply
Number of Outputs: 1
Voltage: 12V
Current: 701-1000 mA
Current (mA): 1000.0
Polarity: Center Minus
Made in: China
Plug Type: Barrel