Car Jacks

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º.• Chocks supplied on rope for easy storage and removal from underneath wheels.Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30tonne. • Choc…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.7mm. Size ø91.5mm. Fits saddle ø90-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: ø91.5mm. • Fits saddle ø90-95mm. • Model No. JP12Technical Specification:Nett Weight: 0.055kgJack Pad Size: ø91.5mmStyle: Type BProfile Depth: 7.7mmTo Fit Saddle Size: ø90-95mmWeight: 0.055kgDimensions: Length: 10mm x Height: 190mmWeight: 0.06KgWarranty: Consumable

Solvent based Bitumen Paint, full bodied black brushable compound with added fibres for reinforcement. Specifically designed for overcoating leaking roofs but can also be used to bond felt. Dries to a tough black coating. Features and Benefits Specifically designed for waterproofing in roofing applications Easily applied by brush Once dried creates a tough weatherproof coating Fibre reinforced, can be used in felt bonding applications Available in 5ltr and 25ltr tins Typical Applications Roofing Waterproofing Building

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.• Fitted with innovative 180° turning handle to allow you to jack the car up even in tight spaces.• Profiled lifting arm allows low clearance height of just 100mm making this unit suitable for sports and custom cars.• Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.• White saddle aids positioning under vehicle and safety valve prevents overloading.Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Fitted with innovative 180° turning handle to allow y…

Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 90/455mm. • Chassis Length: 682mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. • Utilises many weight saving techniques such as skeletal lift arm. • Features R…

• Base and reservoir machine welded for increased strength and reduced chance of leakage.• Fitted with overload valve.• Supplied with 2-piece handle.• Fitted with carrying handle.Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Fitted with carrying handle.• Min./Max. Height: 235/445mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Fitted with carrying handle. • Model No. SJ20Technical Specification:Capacity: 20 TonneHydraulic Lift: 150mmMaximum Height: 445mmMinimum Height: 235mmNett Weight: 8.60kgScrew Extension: 60mmDimensions: Length: 145mm x Heig…

Features & Benefits: • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm