Car Jacks

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. A comprehensive range of nine models, see logo beside each jack for main features and the table beside for detailed specification.

Features: *100% brand new and high quality *Made of high quality material, durable and practical to use * Labor-saving jack handle,simple design easy to use. *Long lasting and durable construction,rust resistant. * Perfect for travel use and emergency wheel / tyre changes. *Material: High Carbon Steel *Size: 34cm Package Included: 1 x Car Jack Wrench Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The Clarke CTJ10GLS Heavy Duty Trolley Jack benefits from an extra-long reach, large 148mm diameter saddle and 10 Tonne capacity for easy lifting and a secure hold.

European style trolley jacks manufactured to exacting standards. Lift-and-twist 'Dead Man' mechanism operates via 'D' shaped handle and prevents accidental lowering; lowers rapidly without load and provides smooth, slow, controlled lowering with load. Nylon wheels fitted for quiet operation and prevention of damage to garage floors. Foot pedal for quick lifting of saddle to the vehicle jacking point. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools. Features a low profile lifting arm and extended access platform for use on low slung vehicles.

The Winntec From Sip 20 Ton Trolley Air Bottle Jack Utilises An Aluminium Motor Chromed Pistons And Heat-Treated Cylinder Wall For Durability. Air Filters Prevent Contamination For Performance. • 20 Ton Maximum Weight Capacity • 253Mm To 480Mm Lifting Height Range • 80Mm Screw Extension For Improved Versatility • Heavy-Duty Wide Welded Base Spreads Weight • Polished Main Ram And Chromed Pump Pistons • Heat-Treated Cylinder Wall For Added Durability • Rugged Aluminium Air Motor For Heavy-Duty Use • Designed For Both Horizontal And Vertical Use • Integrated Overload Protections For Safety • Integrated Manual Pump For Versatility • Air Filters Help Prevent Contamination

The Pitking Products quick lift "monkey" jack is designed to be carried on-board the rally car for use in a critical/emergency situation. The jack is lightweight and compact with a sturdy base which is produced from a high grip plastic/rubber suitable for all terrains giving the jack a solid stand point every time. 730mm maximum lifting height ideal for where extra height is neededLightweight and compact designIdeal to keep in a rally car for emergency repair useTo operate, the jack is positioned next to the vehicle at the jacking point, with the protruding leg on the platform used to raise the car. The jack has a ratchet mechanism to lift the vehicle and travels from the minimum point of

Universal Engine & Gearbox SupportDesigned to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etcRemoves the need for using cranes, transmission jacks etcUniversal tool designed for all makes of vehicle - No need for costly model specific bracketsThe unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support armsFully adjustable in all dimensions:- Extension: Min 630mm / Max 960mm- Support Plate Adjustment: 190mmSpare Parts:38360000-01 - Support Pad & Adjustable Bar

The WINNTEC® from SIP 5 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usage via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 150mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty

Seal repair kit for 2 and 3 Tonne hydraulic trolley jacks. Features and Benefits Provides quick and easy seal repair Can greatly extend the working life of hydraulic trolley jacks

Technical Specifications Type: Car lift accessories Material: Rubber Color: Black 4Pcs Rectangle 115*80*25mm Shape: Rectangle Length: 115mm/4.5" Thickness: 25mm/1" Mounting holes Dia.: 12mm/0.5" Mounting Spacing: 37*56mm Features and Benefits ● This is a set of 4 HEAVY DUTY lift pads. ● These were found on many different brand lifts. ● These are very thick and very durable. They are able to hold up to sharp sub-frames and pinch weld lifting points. Notice 1. Please allow 1-2mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Included 4 x Rubber Arm Pads

Chassis Stand / Max Load 6 t / 5.8 kg / Lifting Positions 10

VEVOR Pneumatic Air Jack 3 Ton Triple Bag 6600 lbs Air Pneumatic Jack 43LB 6600 lbs Pneumatic Car Jack 3 Lift Bag Garage Mechanic Van Pro6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: White,Model: Triple Bag Air Jack,Material: Steel Rubber,Working Temp: -60℃~ 50℃

A low entry height Trolley Jack. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. Dimensions T510L: 1010 x 365 x 135mm T525L: 1150 x 350 x 180mm