Car Jacks

Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.

Travel jack, with steel wheels, max. load 1000 kg, lift 33 mm. Supplied = assembled. Lift = 33 mm. Max. load = 1000 kg. Frame material = steel. Wheel diameter = 136 mm. Wheel type = steel wheels. Scope of delivery = 2 castors, 1 lifting mechanism. Application = diverse. Product type = furniture transport units. For moving heavy cupboards, tool cupboards and machines, even when loaded. Easy and fast system with little force required. Extremely handy due to a compact design. Move heavy loads with just a few hand movements: lift using the lifting rod and then push the hook of the roller underneath - finished. Footplate height 12 - 45 mm. The rubber cover on the carrier supports optimally protects …

The Draper PJ30HL is a single stage, high lift pneumatic jack that is capable of lifting 30 tonnes. This jack comes with a minimum height of 360mm but is supplied with 45mm and 100mm height lift extensions that offer a maximum height of 772mm. You can use this product easily and safely thanks to its ergonomic handle, equipped with a “Slow Down” valve and a “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as preventing damage to garage floors. This jack also has industrial quality seals that help prolong

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead mans control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne High Lift Low Profile Trolley Jack• Min./Max. Saddle Height: 80/805mm allowing low entry.• High lift jack arm with incredibly low minimum access height of just 80mm.• Fitted with quick lift foot pedal and dead mans control.• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points.• Fitted

Note: Image is for illustrative purposes only and may differ from the actual product

Hydraulic jack, for horizontal and vertical use with removable lever, max. load 6 t. Supplied = assembled. Max. load = 6 t. Lifting range with lifting head = 265 - 380 mm. Lifting range with lifting toe = 18 - 133 mm. Lift = 115 mm. Weight = 15 kg. Floor clearance = 18 mm. Product type = hydraulic jacks. Very low weight for mobile use. Lift with head or toe. Removable lever for more flexibility. The two sided hydraulic jack can be used safely when the ground clearance is 18 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

Material: Steel; Weight [kg]: 2.33; Load capacity to [kg]: 2000; Certificate: CE; Jack type: Scissor jacks; Length [mm]: 435; Width [mm]: 90; Stroke [mm]: 390

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

This durable 3 Tonne Jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.

The Sip 2.5 Ton Aluminium/Steel Low-Profile Trolley Jack Uses A Quick-Lift System That Raises The Saddle To The Lift Point And Safety Bypass System To Prevent Overloading Plus Xl Saddle And Pad. • 2.5 Ton Maximum Weight Capacity • 95Mm To 470Mm Lifting Height Range • Extra Low-Profile Design For Lower Cars • Durable Aluminium / Steel Construction • Dual Pump Quick-Lift System Raises The Saddle To The Vehicle Lifting Point Quickly • Safety Bypass System Protects The Jack From Potential Problems Or Overloading • Extra-Large Saddle With Rubber Pad • 2-Piece Handle With Rubber Bumper • Heavy-Duty Wheels And CastorsPTDSIP03623

Trolley Jack 2Ton Note: Image is for illustrative purposes only and may differ from the actual product

Features: Ensure your Motorhome remains stable and secure on any terrain with Motorhome Feet Jack Pads, featuring a heavy duty design that prevents sinking into soft ground. These robust jack pads boast a large surface area complemented by durable metal pins, providing superior grip and vibration reduction for your Motorhome steadiness. For Motorhome enthusiasts and motorhome travelers who seek reliable support solutions during their outdoor adventures and stops. Perfect for use at campsites or in the wilderness, these feet pads are essential for maintaining level and stability on uneven surfaces. The set making these Motorhome jack pads with pins an indispensable accessory for your next

Load-bearing Capacity [t]: 2; Width Base Plate [mm]: 95; Colour: silver; Operating Mode: Hydraulic; Material: Steel; Lifting Height from [mm]: 155; Lifting Height, up to [mm]: 310; Thread Length [mm]: 70; Jack type: Bottle jacks; Registration Type: with TÜV® certificate

The Faithfull FAIAUJACTRO15 is a light-duty hydraulic Trolley Jack featuring large front wheels and rear swivelling castors with a large saddle to aid accurate placement under the vehicle and to ensure a firm seating. It is fitted with an overload protection system for added safety. Manufactured to EN 1494 specifications. Capacity: 1.5 Tonnes (1500kg).Height range: 128mm- 300mm.

The WINNTEC® from SIP 1.35 TON Aluminium Racing Trolley Jack is manufactured from u Litrea lightweight all-aluminium and nylon wheels to ensure a lightweight and compact nature that makes it perfect for a variety of on-the-go applications. Designed for automotive garages, workshops, and mobile applications. KEY FEATURES 80mm to 375mm lifting height range Lightweight and all-aluminium construction Non-marking nylon wheels help prevent damage Side handles for portability and positioning Universal joint single pump for easy lifting WINNTEC® from SIP 3-Year Warranty