Car Jacks

• Sturdy yet lightweight wheel chocks weigh around 250g each.• Prevents car, caravan, or light aircraft moving when jacking or parked on an incline.• Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Sturdy yet lightweight wheel chocks weigh around 250g each. Prevents car, caravan, or light aircraft moving when jacking or parked on an incline. Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Sturdy yet lightweight wheel chocks weigh around 250g each. • Prevents car, caravan, or light aircraft moving when jacking or parked on…

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Off-road base compatible with most high-lift farm jacks.• Designed to spread ground force of jack to prevent sinkage on soft surface.• Includes handle coupler to lock most high lift farm jacks handle in position for secure transportation.• Base size 184 x 185mm.Technical SpecificationNett Weight: 1.35kg

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

• EXTRA SAFETY - Provides extra safety when locating awkward jacking point.• SUITABLE FOR - Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.Provides extra safety when locating awkward jacking point. Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.• Provides extra safety when locating awkward jacking point. • Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin. • Model No. X136Technical Specification:Application(s): 3000CXD, 3010CXMaximum Width: 820mmMinimum Width: 580mmNett Weight: 12.90kgScrew Adjustment: 75mmDimensions: Length: 170mm x Height: 142mmWeight: 12.1KgWarrant…

• Compact design but handles the larger bonnets, tailgates etc.• Ideal for doors, bonnets, bumpers, wings and spoilers.• Fully adjustable, rotates full 180°.• Adjustable and rotating bars make this stand suitable for almost all panel types.• Portable for easy manoeuvring of application from preparation to spray booth.Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully adjustable, rotates full 180°. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.• Compact design but handles the larger bonnets, tailgates e…

• 1tonne Folding crane with heavy-duty forged hook.• Fast folding for easy storage and transportation. • Low entry with a height of only 80mm at the wheels.• Weighs 124kg and is perfect for professional workshop use.• Beam can be set in three positions, allowing a lifting capacity from 700kg to 1000kg.• 300° Rotating pump handle aids use where space is limited.• 2 Year guarantee*.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Premier 1tonne folding crane with heavy-duty forged hook. Low entry with a height of only 80mm at the wheels. Fast folding for easy storage and transportation. Weighs 124kg and is perfect for professional wor…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.