Car Jacks

Replacement Trolley Jack Valve Release Knob by Kennedy

TÜV & GS tested scissor jack Ultra Lift L Pro (347210) - suitable for cars, vans and trailers with a total weight of up to 2.8 tonnes Sturdy and thickened base plate, corrosion resistant powder coated steel for durable and strong load and pressure resistance Ideal lifting height between 320 and 440 mm. When lifting work under 320 mm, increased forces are created on the ball bearing. Lifting is not recommended This 2.0 t scissor jack is perfect for cars from 320 mm sill height and particularly gentle on the sill thanks to the rotating rubber pad Perfect breakdown aid with additional storage bag and practical extension should not be missing in any boot Premium scissor jack - stable - powerful -…

Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Pump lever, grey, for machine jacks. Supplied = assembled. Category = lifting equipment. Product type = levers and handles. Colour = grey.

VEVOR Floor Jack, 4 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Dual Piston Quick Lift Pump, Floor Jack Lifting Range 100 mm-533 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingMagnetic Tool TrayHandle Length: 52 in/1320 mm,Product Size (L x W x H): 29x13.5x6.4 (inch)/740x343x162 (mm),Lift Weight Capacity: 8800 LBS/4 Tons,Model: K560,Product Weight: 76.6 lb/37.95 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 20.98"/533 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 3.94"/100 mm

GREY support trestles, 1 pair, max. load 14 t, 4+ pairs. Supplied = assembled. Max. load = 14 t. Lifting range with lifting head = 242 - 400 mm. Lift = 158 mm. Weight = 13 kg. Weight per item = 6.5 kg. Product type = uprights. For supporting vehicles or heavy machinery. Robust design with wide and stable contact surface. Safe and easy handling. Perfectly suited for supporting and securing heavy loads. High quality workmanship with a long service life.

Trolley Jack / Max Load 3 t / Hubhöhe 330 mm / Cushions

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle [Durable Material and Easy Operation]Floor jack

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Note: Image is for illustrative purposes only and may differ from the actual product

Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.2.5 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 95/485mm allowing low entry.• Chassis Length: 725mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. • Utilises many

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

This fast lifting jack is built for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors.