Car Jacks

High-density plastic with anti-slip steel bar. Prevents a maximum 30tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features & Benefits: • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (H x L x W): 225 x 475 x 200mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications: Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Materi…

Suitable for heavy engines including 6-cylinder variants. Supports engine during maintenance operations including engine mounting replacement. Beam is supported on two rubber covered feet with third, height adjustable foot, resting on the front of the vehicle. Supplied with two short lengths of chain.

Bottle jack, with hydraulic unit, max. load 15 t. Supplied = assembled. Max. load = 15 t. Lifting range with lifting head = 225 - 425 mm. Lift = 140 mm. Weight = 7.7 kg. Piston diameter = 48 mm. Base plate length = 135 mm. Base plate width = 142 mm. Additional height when unwound = 60 mm. Overall height from - to = 225 - 425 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with one chain. Contents: 1 x Chain Specifications: Capacity: 300kg Min. width: 1,015mm Max. width: 1,380mm Adjustable screw height: 0-305mm Overall beam length: 990mm Chain quantity: 1 Weight: 15kg

Tyre storage/transport dolly ideal for use with up to eight tyres. Four Ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. The dolly has a capacity of 136kg. Features & Benefits: • Tyre storage/transport dolly ideal for use with up to eight tyres. • Four Ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. • Overall Size (W x D x H): 640 x 640 x 110mm. • Maximum Weight Capacity: 136kg. • Model No. STR006 Specifications: Model No STR006 Brand: Sealey Maximum Weight Capacity: 136kg Nett Weight: 3.28kg Overall Size (W x D x H): 640 x 640 x 110mm Wheel Capacity: 8

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 5m x 60mm, 2 Tonne

Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: Ø117mm. • Fits saddle Ø112-117mm. • Model No. JP18 Specifications: Model No JP18 Brand: Sealey Nett Weight: 0.235kg Jack Pad Size: Ø117mm Style: Type B Profile Depth: 18mm To Fit Saddle Size: Ø112-117mm Weight: 0.235kg

Fully certified and approved to comply with MOT requirements. 1.6m Load arm reach. Beam Lift: 95-300mm. 2-Stage mechanical safety lock and telescopic finger guards. Spring loaded flat arms with roller bearings when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Supplied with two pairs of aluminium support blocks. Wide lift configuration meets MOT recommendation for lifting on jacking point. Features & Benefits: • Fully certified and approved to comply with MOT requirements. • 1.6m Load arm reach. • Beam Lift: 95-300mm. • 2-Stage mechanical safety lock and tele…

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.