Car Jacks

Heavy duty Car Hydraulic Bottle Jack Lifting Stand Capacity: 2 T Car Jack Stand Lifting 158 to 308 mm Car Lift Jack Supplied in Protective Rubber Pad Excellent handling and stability for all vehicles Lift Stand For Emergency and Vehicle Repairs Heavy Duty Lifting Tool for all vehicles Quality vehicle lifting equipment Brand: alca Germany

Heavy duty lever ratchet operated jack. Versatile indoor and outdoor applications. Can lift 2 tonne with a range of 130 to 1070mm. Suitable for normal jacking requirements or offloading vehicles, moving heavy objects and removing tree stumps. Product weight 13.2kg.

The Sip 3 Ton Quick-Lift Trolley Jack Utilises A Quick-Lift System That Swiftly Raises The Saddle To The Lifting Point Plus A Heavy-Duty Chassis For The Most Demanding Tasks And Xl Saddle And Pad. • 3 Ton Maximum Weight Capacity • 135Mm To 495Mm Lifting Height Range • Dual Pump Quick-Lift System Raises The Saddle To The Vehicle Lifting Point Quickly • Safety Bypass System Protects The Jack From Potential Problems Or Overloading • Removable 2-Piece Handle With Rubber Grip • Heavy-Duty Chassis Wheels And Castors • Extra-Large Saddle And Rubber PadPTDSIP03633

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Pump lever, grey, for machine jacks. Supplied = assembled. Category = lifting equipment. Product type = levers and handles. Colour = grey.

Note: Image is for illustrative purposes only and may differ from the actual product

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with 45/75mm extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

The Clarke CTJ2QLP Jack combines the benefits of a low profile and a quick lift trolley jack. These features are very useful for rapid operation on low cars, making it ideal for motor sports, garages and mobile service operators.

Maximum lift: 465 mm Minimum under-body clearance: 133 mm Quick-lift device brings jack into contact in a single movement

The JCB-TH32515 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH32515 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 505mm in height.The JCB-TH32515’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance.Thanks to its double-piston design, the JCB-TH32515 is a quick-lift trolley jack, which will save you precious time and effort in…

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

HYDRAULIC POST LIFT 5T KELTIN PRODUCT DESCRIPTION: The KELTIN post lift is an ideal solution used in car workshops as well as in home garages. A simple, solid construction increases the reliability of the device. Small size guarantees ease of use and high mobility. A screw-in pin is used for maximum lifting height. TECHNICAL DATA: lifting capacity: 5000 kg min. height: 170mm height max.: 320mm GOODS FEATURES: Libra 3.5 kg Bar code K00123

The B-G Racing Formula Small Quick Lift Jack is suitable for single seaters and formula models which have ultra low entries in order to lift them. These latest versions now feature a safety lock for the handle.The Quick lifts are designed, as the name suggests, to slip easily underneath the application and lift to a fixed height with one easy action. These jacks are constructed from mild steel and are finished to a great quality look and feel, with a quality action and durability. The Quick lift jacks are power coated in a shade of silver/grey for durability and corrosion resistance. The ends of the hande are finished in yellow for ease of visibilityTwo sizes are available:Short Length: 790mm Width: …